HYRIG can supply the Cameron Type U shear BOP spare parts range. The Cameron 46910-01 (also referenced as 644435-01) is a heavy-duty shear blade designed for 13-5/8" 3-10M Type U shear rams to cut the drill pipe in an emergency.
| Parameter | Detail |
|---|---|
| Part Number | 46910-01 / 644435-01 |
| Component Type | Shear Blade |
| Equipment Type | Cameron Type U Shear BOP |
| BOP Size | 13-5/8" |
| Working Pressure | 3,000 - 10,000 psi |
| Material | High-strength steel |
Data source: Technical data table and official specifications.
| Parameter | Detail |
|---|---|
| Ram Type | Shear Ram |
| Position | Center (between side packers) |
| Weight | Not specified; confirm with supplier |
The shear blade is a solid metal component positioned between the left and right side packers in the shear ram assembly. When the BOP is activated in an emergency (such as a kick or blowout), the hydraulic rams drive the blade forward to physically shear the drill pipe, allowing the packers to seal the wellbore.
When replacing the shear blade, inspect the elastomer side packers for damage caused by the shearing action.
Related Components:
Not sure if this blade fits your shear ram? Provide your BOP model and serial number. HYRIG will confirm the correct Cameron part.
Suitable for Cameron Type U shear BOPs (13-5/8" 3-10M) used for emergency well control and pipe shearing operations.
HYRIG provides replacement shear blades and side packers for Cameron Type U BOPs.
Why are there two part numbers (46910-01 and 644435-01)?
Cameron often updates part numbers. 46910-01 is the primary reference, while 644435-01 is an alternate or legacy number for the same shear blade.
Should I replace the side packers when replacing the blade?
Yes, it is highly recommended to inspect and typically replace the side packers (46752-01 and 46751-01) whenever the shear blade is changed.
Does this blade fit 15,000 psi BOPs?
This blade is specified for 3-10M BOPs. Contact HYRIG for 15M configurations.
*Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.*
HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Cameron 46910-01 shear blade. For selection support, contact HYRIG: info@hyrig.com
Page last updated: 2026-10-28
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.