HYRIG can supply the Cameron Type U ram BOP seal range and its spare parts. The Cameron 644223-02 is a VBR (Variable Bore Ram) top seal designed for 13-5/8" 3-10M Type U ram BOPs, ensuring a tight seal against the BOP body.
| Parameter | Detail |
|---|---|
| Part Number | 644223-02 |
| Component Type | VBR Top Seal |
| Equipment Type | Cameron Type U Ram BOP |
| BOP Size | 13-5/8" |
| Working Pressure | 3,000 - 10,000 psi |
| Material | NBR (Nitrile Rubber) |
| API Standard | API 16A |
Data source: Technical data table and official specifications.
| Parameter | Detail |
|---|---|
| Seal Type | VBR Top Seal |
| Assembly Position | Upper ram body (VBR assembly) |
| Weight | Not specified; confirm with supplier |
The VBR top seal is installed on the upper ram body of a Variable Bore Ram assembly. Because VBR packers have a different geometry than standard fixed-bore rams, they require a specific top seal (644223-02) to ensure wellbore pressure does not migrate past the ram when closed.
When replacing the VBR top seal, ensure you are not using a standard pipe ram top seal, as they are not interchangeable.
Related Components:
Not sure if this is the correct top seal for your ram? Provide your ram type (VBR or standard) and BOP model. HYRIG will confirm the correct part.
Suitable for Cameron Type U ram BOPs (13-5/8" 3-10M) equipped with Variable Bore Ram assemblies.
HYRIG provides replacement VBR top seals and VBR packers for Cameron Type U BOPs.
Is this the same top seal used on standard pipe rams?
No, the VBR top seal (644223-02) has a different profile to match the VBR packer.
Can I buy the VBR packer and top seal together?
Yes, HYRIG supplies both the VBR packer and the VBR top seal for a complete overhaul.
What is the pressure rating?
It is rated to match the BOP working pressure, typically up to 10,000 psi.
*Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.*
HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Cameron 644223-02 VBR top seal. For selection support, contact HYRIG: info@hyrig.com
Page last updated: 2026-10-28
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.