HYRIG can supply the Cameron Type QRC ram packer range and its spare parts. The Cameron 5871-14 is an NBR (Nitrile Rubber) blind ram packer designed for 10" 3,000 psi Type QRC BOPs to fully seal the wellbore.
| Parameter | Detail |
|---|---|
| Part Number | 5871-14 |
| Component Type | Ram Packer (Blind) |
| Equipment Type | Cameron Type QRC Ram BOP |
| BOP Size | 10" |
| Working Pressure | 3,000 psi |
| Material | NBR (Nitrile Rubber) |
| API Standard | API 16A |
| Temperature Range | -18°C to 121°C |
Data source: Technical data table and official specifications.
| Parameter | Detail |
|---|---|
| BOP Size | 10" |
| Ram Type | Blind (No pipe bore) |
| Weight | Not specified; confirm with supplier |
In a Cameron Type QRC BOP, the blind ram packer has no center bore, allowing it to completely shut off and seal an empty wellbore. The QRC (Quick Ram Change) design enables ram replacement in minutes, significantly reducing downtime during urgent well control operations. The self-feeding ram packer design ensures a reliable seal under pressure.
When replacing the 5871-14 ram packer, verify the part number against your equipment manual.
Alternative Sizes:
Related Seals:
Not sure which ram packer size fits your drill string? Provide your pipe size and BOP model. HYRIG will confirm the correct Cameron Type QRC ram packer.
Suitable for Cameron Type QRC ram BOPs (10" 3,000 psi) in well control operations where full wellbore closure is required.
HYRIG provides replacement ram packers for Cameron Type QRC BOPs.
What does "Blind" mean for a ram packer?
A blind ram packer has no hole in the center, allowing the rams to fully close and seal an empty wellbore.
What is the advantage of the QRC design?
The QRC (Quick Ram Change) design allows ram replacement in minutes, compared to hours on conventional BOPs, minimizing rig downtime.
Can this be used for H2S service?
Yes, HNBR and other elastomer options are available for H2S service. Contact HYRIG for specific material requests.
*Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.*
HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Cameron 5871-14 blind ram packer. For selection support, contact HYRIG: info@hyrig.com
Page last updated: 2026-10-28
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.