HYRIG can supply the Cameron Type QRC ram packer range and its spare parts. The Cameron 5871-3 is an NBR (Nitrile Rubber) pipe ram packer designed for 10" 3,000 psi Type QRC BOPs to seal around 3-1/2" pipe.
| Parameter | Detail |
|---|---|
| Part Number | 5871-3 |
| Component Type | Ram Packer (Pipe) |
| Equipment Type | Cameron Type QRC Ram BOP |
| BOP Size | 10" |
| Pipe Size | 3-1/2" |
| Working Pressure | 3,000 psi |
| Material | NBR (Nitrile Rubber) |
| API Standard | API 16A |
Data source: Technical data table and official specifications.
| Parameter | Detail |
|---|---|
| BOP Size | 10" |
| Pipe Size | 3-1/2" |
| Ram Type | Pipe Ram |
| Weight | Not specified; confirm with supplier |
The QRC (Quick Ram Change) design enables rapid ram replacement, reducing downtime during urgent well control operations. This 5871-3 packer is specifically molded to seal around 3-1/2" pipe, and the self-feeding elastomer design ensures a reliable seal under pressure.
When replacing the 5871-3 ram packer, verify the part number against your equipment manual.
Alternative Sizes:
Related Seals:
Not sure which ram packer size fits your drill string? Provide your pipe size and BOP model. HYRIG will confirm the correct Cameron Type QRC ram packer.
Suitable for Cameron Type QRC ram BOPs (10" 3,000 psi) in well control operations involving 3-1/2" pipe.
HYRIG provides replacement ram packers for Cameron Type QRC BOPs.
What pipe size does this ram packer fit?
It fits 3-1/2" pipe in a 10" Cameron Type QRC BOP.
What is the advantage of the QRC design?
The QRC (Quick Ram Change) design allows ram replacement in minutes, compared to hours on conventional BOPs, minimizing rig downtime.
Can this be used for H2S service?
Yes, HNBR and other elastomer options are available for H2S service. Contact HYRIG for specific material requests.
*Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.*
HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Cameron 5871-3 ram packer. For selection support, contact HYRIG: info@hyrig.com
Page last updated: 2026-10-28
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.