Cameron Extended Range VBR-II Packers | 13-5/8" 10K U BOP

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Cameron Extended Range VBR-II packer range and its spare parts. The VBR-II is designed for 13-5/8" 10,000 psi Cameron U BOPs, providing a wide sealing range from 3-1/2" to 5-7/8" pipe and qualified to API 16A fatigue testing standards.
Conatct For Details
DetailReview(0)Additional

HYRIG can supply the Cameron Extended Range VBR-II packer range and its spare parts. The VBR-II is designed for 13-5/8" 10,000 psi Cameron U BOPs, providing a wide sealing range from 3-1/2" to 5-7/8" pipe and qualified to API 16A fatigue testing standards.

Key Facts

  • Product Name: Cameron Extended Range VBR-II Packers
  • BOP Size: 13-5/8"
  • Pressure Rating: 10,000 psi
  • Sealing Range: 3-1/2" to 5-7/8"
  • Qualification: API 16A 2nd Edition, Appendix B (Fatigue Test)

Key Specifications

ParameterDetail
Equipment TypeVariable Bore Ram (VBR-II)
BOP CompatibilityCameron 13-5/8" 10,000 psi U BOP
Temperature RatingContinuous 180°F, Excursions to 200°F
H2S Service LimitLess than 5%
Elastomer MaterialSpecially formulated Nitrile

Data source: Technical bulletin.

Dimensions & Part Numbers

Item DescriptionCameron Part Number
Ram Subassembly2164664-01
Ram (Block)2164404-01
Ext. Range VBR-II Packer2164599-01
VBR Top Seal644223-02-00-01

Structure / Working Principle

The Extended Range VBR-II packer allows a single ram cavity to seal on a wide range of pipe diameters, reducing the need to change out rams during drilling. The packer utilizes a specially formulated nitrile elastomer to maintain flexibility and sealing integrity across the 3-1/2" to 5-7/8" range under extreme pressure (10,000 psi).

Cross-Reference & Replacement

API 16A Fatigue Test Results (ER 2843):
The Extended Range VBR-II Packers (P/N 2164599-01) successfully completed the API 16A 2nd Edition, Appendix B fatigue test. The test included 546 closures and 78 rated pressure tests at 10,000 psi. Half of the tests were conducted on 5-7/8" pipe, and the other half on 3-1/2" pipe, demonstrating reliable performance across the entire specified range.

When replacing components, ensure the BOP is a 13-5/8" 10,000 psi U Type model and verify the temperature and H2S limits.

Selection Support

Not sure if this VBR-II packer is suitable for your well conditions? Provide your fluid temperature and H2S concentration to HYRIG. We will confirm the compatibility of the nitrile elastomer.

Applications

Suitable for Cameron 13-5/8" 10,000 psi U BOPs in drilling and workover operations where a wide range of pipe sizes (3-1/2" to 5-7/8") must be sealed.

Spare Parts

HYRIG provides replacement VBR-II packers and top seals for Cameron U BOPs.

Frequently Asked Questions

What is the maximum pipe size this VBR-II packer can seal?
It can seal pipe sizes up to 5-7/8" and down to 3-1/2".

What is the temperature limit for this packer?
The specially formulated nitrile elastomer provides continuous service up to 180°F, with excursions up to 200°F.

Can this packer be used in H2S environments?
Yes, but H2S exposure should be limited to less than 5%.

*Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.*

Contact

HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Cameron Extended Range VBR-II Packers. For selection support, contact HYRIG: info@hyrig.com

Page last updated: 2026-10-28

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit