Cameron T-81 Ram BOP | Manual & Hydraulic Configurations

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Cameron T-81 Ram BOP range and its spare parts. The Cameron T-81 is a compact, lightweight ram-type blowout preventer perfectly suited for well servicing, workover, and small bore drilling applications.
Conatct For Details
DetailReview(0)Additional

HYRIG can supply the Cameron T-81 Ram BOP range and its spare parts. The Cameron T-81 is a compact, lightweight ram-type blowout preventer perfectly suited for well servicing, workover, and small bore drilling applications.

Key Facts

  • Product Name: Cameron T-81 Ram BOP
  • Drive Options: Manual or Hydraulic
  • Configurations: Single, Double, Triple Cavity
  • Available Sizes: 7-1/16" and 9"
  • Pressure Ratings: 3,000 psi and 5,000 psi
  • API 16A Monogram: Available

Key Specifications

ParameterDetail
Equipment TypeRam-Type Blowout Preventer
Size & Pressure Range7-1/16" x 3K, 7-1/16" x 5K, 9" x 3K, 9" x 5K
Ram Block Sizes (7-1/16")CSO (blind) to 5-1/2"
Ram Block Sizes (9")CSO (blind) to 7-5/8"
Opening/Closing Pressure1,500 psi (Max & Recommended)
Closing Ratio4.2:1

Data source: Technical brochure.

Dimensions & Weights (T-81 Hydraulic Type)

SizeStyleOverall LengthOverall WidthStudded Weight (lbs)Flanged Weight (lbs)
7-1/16" x 3KSingle63.37"20.57"1,5441,657
7-1/16" x 3KDouble63.37"20.57"2,5542,667
7-1/16" x 3KTriple63.37"20.57"3,4893,602
7-1/16" x 5KSingle64.87"20.84"1,6471,764
9" x 3KSingle70.62"22.88"1,8181,931
9" x 5KSingle70.62"23.15"1,9122,079

Dimensions & Weights (T-81 Manual Type)

SizeStyleOverall LengthOverall WidthStudded Weight (lbs)Flanged Weight (lbs)
7-1/16" x 3KSingle52.36"25.85"1,5511,664
7-1/16" x 5KSingle52.36"25.85"1,6051,718
9" x 3KSingle59.10"28.25"--

Hydraulic Capacity (T-81 Hydraulic Only)

Parameter7-1/16" x 3K7-1/16" x 5K9" x 3K9" x 5K
Volume to Open (US gal)0.560.560.660.66
Volume to Close (US gal)0.590.590.700.70

Structure / Working Principle

The Cameron T-81 is designed for rugged, lightweight performance. It utilizes standard Cameron ram blocks and packers (Top Seals and Ram Packers). The hydraulic version features a 4.2:1 closing ratio, allowing it to achieve a full seal with a standard 1,500 psi operating pressure. Its compact footprint makes it ideal for rigs with limited space or for well servicing operations.

Cross-Reference & Replacement

When replacing components for the Cameron T-81, always verify the size and pressure rating of your BOP.

Replacement Parts Include:

  • Ram Blocks
  • Ram Packers (elastomer seals)
  • Top Seals

Note: Specific part numbers for ram blocks and seals vary based on the pipe size and BOP pressure rating. Please contact HYRIG with your specific pipe OD requirements for part number confirmation.

Selection Support

Need to decide between Manual and Hydraulic for your T-81? Provide your rig's available operating pressure and application requirements (e.g., workover vs. drilling). HYRIG will confirm the correct Cameron configuration.

Applications

Suitable for well servicing, workover, and small bore drilling applications where a compact and lightweight well control stack is required.

Spare Parts

HYRIG provides replacement ram blocks, ram packers, and top seals for Cameron T-81 BOPs.

Frequently Asked Questions

What is the maximum operating pressure for the T-81?
The maximum recommended operating pressure to open and close the hydraulic T-81 is 1,500 psi.

Is the T-81 available with API 16A monogram?
Yes, API 16A Monogram is available. Please contact HYRIG for more information and certification documents.

What are the available cavity options?
The T-81 is available in single, double, and triple cavity configurations.

*Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.*

Contact

HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Cameron T-81 Ram BOP. For selection support, contact HYRIG: info@hyrig.com

Page last updated: 2026-10-28

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit