HYRIG can supply the Cameron DL annular BOP range and its spare parts. The Cameron DL is a high-pressure annular blowout preventer designed for reliable performance in a shorter height and lighter weight than comparable annular BOPs.
| Parameter | Detail |
|---|---|
| Equipment Type | High-Pressure Annular BOP |
| Available Sizes | 7-1/16", 9", 11", 13-5/8", 21-1/4" (and others in range) |
| Working Pressure Range | 2,000 psi to 10,000 psi |
| Configurations | Single and Dual configurations available for certain sizes |
| Packer Qualification | API 16A qualification testing passed |
Data source: Technical brochure.
| Parameter | Detail |
|---|---|
| Design Advantage | Shorter height and lighter weight compared to standard annular BOPs |
| Specific Dimensions | Vary by size; confirm with supplier |
The unique design of the Cameron DL BOP does not require wellbore assist to close. Closing pressure forces the operating piston and pusher plate upward to displace the solid elastomer donut. As the packer closes, interlocking steel reinforcing inserts rotate inward to form a continuous support ring at the top and bottom of the packer.
These inserts remain in contact with each other whether the packer is open, closed on pipe, or closed on open hole. This design allows the annular to close on drill pipe or large tubulars without reducing operating pressure, minimizing the risk of indentation or damage to the casing.
When selecting or replacing a Cameron DL annular BOP, verify the required bore size and pressure rating to ensure compatibility with your well control stack. Because the DL design does not rely on wellbore pressure to assist closure, it is ideal for applications where casing damage is a primary concern.
Contact HYRIG for replacement packers and elastomer components compatible with the DL series.
Not sure which DL size or pressure rating fits your well plan? Provide your wellbore parameters and casing program. HYRIG will confirm the correct Cameron DL configuration and provide a quote.
Suitable for high-pressure drilling and workover operations, particularly where space is limited (shorter height) and where preventing casing damage or indentation is critical.
HYRIG provides replacement packers and spare parts for Cameron DL annular BOPs. Contact us with your specific size and pressure rating requirements.
Does the Cameron DL require wellbore pressure to seal?
No. The unique design of the DL BOP does not require wellbore assist to close and seal.
What sizes are available for the Cameron DL?
The range covers sizes from 7-1/16" to 21-1/4", with working pressures from 2,000 to 10,000 psi.
Are dual configurations available?
Yes, dual configurations are available for certain sizes. Please contact HYRIG with your specific size requirements.
*Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.*
HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Cameron DL Annular BOP. For selection support, contact HYRIG: info@hyrig.com
Page last updated: 2026-10-28
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.