Shaffer API Flange Fasteners & Gaskets | LXT BOP Connections

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Shaffer LXT ram BOP spare parts. This page lists the API flange fasteners and ring gaskets required for connecting the 13-5/8" 10M LXT Ram BOP to the wellhead and choke/kill lines.
Conatct For Details
DetailReview(0)Additional

HYRIG can supply the Shaffer LXT ram BOP spare parts. This page lists the API flange fasteners and ring gaskets required for connecting the 13-5/8" 10M LXT Ram BOP to the wellhead and choke/kill lines.

Key Facts

  • Product Name: Shaffer API Flange Fasteners & Gaskets
  • Equipment Type: Shaffer LXT Ram BOP
  • Components: Studs, Nuts, Ring Gaskets

Key Specifications

ParameterDetail
Component TypeAPI Flange Fasteners & Gaskets
Equipment TypeShaffer BOP Connections
StandardAPI Spec 6A

Dimensions

ParameterDetail
SizesVarious (e.g., 1/2" to 2-1/2" studs, BX 159 gaskets)

Structure / Working Principle

Proper fasteners and ring gaskets are critical for maintaining a pressure-tight seal on the BOP flanged connections. Studs are torqued to specific values (using API thread compound or Moly Paste) to compress the metal ring gasket (e.g., BX 159 for the main bore) into the flange grooves.

Cross-Reference & Replacement

Below is a reference list of common fasteners and gaskets for the 13-5/8" 10M LXT BOP connections. Refer to the manual (Chapter 5) for the complete list.

API Ring Gaskets:

Nominal SizeWorking PressureGasket TypeShaffer Part Number (Soft Iron)
13-5/8"10,000 psiBX 159050357
4-1/16"10,000 psiBX 155050366

API Nuts & Studs (Examples):

SizeDescriptionShaffer Part Number
3/4"-10UNCHeavy Hex Nut, Black020004
2"-8UNHeavy Hex Nut, Black020015
3/4" x 4"Tap End Stud, Black011003

Related Components:

Selection Support

Need to confirm the exact stud length or gasket part number for your flange connection? Contact HYRIG with your flange specifications.

Applications

Used for connecting the Shaffer LXT BOP to wellheads and manifolds.

Spare Parts

HYRIG provides replacement API fasteners and ring gaskets for Shaffer BOPs.

Frequently Asked Questions

What type of ring gasket is used for the 13-5/8" 10M bore?

The main bore connections typically use a BX 159 ring gasket.

Should I use grease on the ring gasket?

No, the manual specifies that ring gaskets should be installed dry.

Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.

Contact

HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Shaffer API flange fasteners and gaskets. For selection support, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit