HYRIG can supply the Shaffer LXT ram BOP spare parts. This page lists the internal components for the 13-5/8" 10M LXT manual lock door assembly, including hydraulic slider pistons, mini-slider pistons, and open/close valves for servicing the BOP doors.
| Parameter | Detail |
|---|---|
| Component Type | Door Assembly Internal Parts |
| Equipment Type | Shaffer LXT Manual Lock Door Assembly (8.75" Stroke) |
| Working Pressure | 10,000 psi BOP (3,000 psi operator max) |
| Parameter | Detail |
|---|---|
| Compatibility | Shaffer 13-5/8" 10M LXT, 15.25" Manual Lock |
The Shaffer LXT door assembly relies on a hydraulic slider mechanism to open and close the door safely. The open/close valves control the flow of hydraulic fluid to the slider pistons. The internal components listed here are critical for maintaining the smooth operation of the door sliding mechanism.
Below is a list of key internal components for the Shaffer door assembly. Verify the part number and item number against the manual (Figure 5-1) before ordering.
| Item No. | Description | Shaffer Part Number |
|---|---|---|
| 13 | Piston, Slider, Open, 15.25" Mnlk | 20071250 |
| 14 | Piston, Slider, Close, 15.25" Mnlk | 20071249 |
| 24 | Piston, Slider, Mini, Open/Close | 20033104 |
| 43 | Valve, Open/Close, Door, 13-10M LXT | 20033108 |
| 44 | Valve, Cap, Open/Close | 20033109 |
| 46 | Sub, Orientation, Slider Pit | 20033279 |
| 62 | Plate, Slider, Piston | 20034038 |
| 76 | O-ring, 70 Duro (for slider) | 5019418 |
Related Components:
Not sure which slider piston or valve fits your Shaffer LXT door? Provide your BOP serial number and door assembly part number. HYRIG will confirm the exact configuration.
Suitable for Shaffer 13-5/8" 10,000 psi LXT Ram BOPs during door mechanism maintenance and hydraulic system repair.
HYRIG provides replacement door assembly components for Shaffer LXT BOPs.
What is the difference between item 13 and 14?
Item 13 (20071250) is the piston for the "Open" side of the slider. Item 14 (20071249) is for the "Close" side.
When should the open/close valve be replaced?
If the door will not open or close properly despite sufficient hydraulic pressure, the valves may be stuck or leaking, requiring replacement.
Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.
HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Shaffer LXT door assembly parts. For selection support, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.