HYRIG can supply the Shaffer LXT ram BOP spare parts. The Shaffer 20023567 is a ram shaft seal assembly (RSSA) designed for 13-5/8" 10M LXT ram BOPs to hold wellbore pressure and opening hydraulic pressure.
| Parameter | Detail |
|---|---|
| Part Number | 20023567 |
| Component Type | Ram Shaft Seal Assembly (RSSA) |
| Equipment Type | Shaffer 13-5/8" 10M LXT Ram BOP |
| Working Pressure | 10,000 psi |
| Components Included | Adapter (20023568), Wiper Ring Holder (20023569), Retainer Ring (20023474), Wiper Ring (20034475), PIP Seal (20023477), Polypak Seal (20023480) |
| Parameter | Detail |
|---|---|
| Shaft Diameter | 4.5" |
| Assembly Position | Inside the LXT door cavity |
| Quantity Required | 2 per single BOP, 4 per double BOP |
The RSSA is a critical sealing component installed in the LXT BOP door. It is a composite assembly that includes a Polypak seal, PIP seal, wiper ring, and adapter. It serves a dual purpose: preventing wellbore pressure from escaping through the moving ram shaft, and sealing the hydraulic opening pressure inside the cylinder. If the wellbore is under pressure and fluid is visible from the LXT door weep hole, this indicates the RSSA is leaking and requires replacement.
When replacing the RSSA, it is highly recommended to inspect the Tail Shaft Seal Assembly (TSSA) and have the complete door seal kit on hand.
Related Components:
Not sure if this seal fits your LXT door assembly? Provide your BOP serial number and assembly part number (e.g., 20033094). HYRIG will confirm the exact configuration.
Suitable for Shaffer 13-5/8" 10,000 psi LXT Ram BOPs in high-pressure drilling and workover operations.
HYRIG provides replacement ram shaft seal assemblies and related soft goods for Shaffer LXT BOPs.
How do I know if the RSSA is leaking?
Observe the weep hole on the LXT door. If fluid is visible there while the wellbore is under pressure, the RSSA needs replacement.
What is included in the 20023567 assembly?
The assembly includes the adapter, wiper ring holder, retainer ring, wiper ring, PIP seal, and Polypak seal.
Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.
HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Shaffer 20023567 ram shaft seal assembly. For selection support, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.