Shaffer 20033119 Tail Shaft Seal Assembly | 13-5/8" 10M LXT

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Shaffer LXT ram BOP spare parts. The Shaffer 20033119 is a tail shaft seal assembly (TSSA) designed for 13-5/8" 10M LXT ram BOPs to seal the rear end of the ram cylinder.
Conatct For Details
DetailReview(0)Additional

HYRIG can supply the Shaffer LXT ram BOP spare parts. The Shaffer 20033119 is a tail shaft seal assembly (TSSA) designed for 13-5/8" 10M LXT ram BOPs to seal the rear end of the ram cylinder.

Key Facts

  • Product Name: Shaffer Tail Shaft Seal Assembly (TSSA)
  • Part Number: 20033119
  • BOP Size: 13-5/8"
  • Pressure Rating: 10,000 psi
  • Equipment Type: Shaffer LXT Ram BOP

Key Specifications

ParameterDetail
Part Number20033119
Component TypeTail Shaft Seal Assembly (TSSA)
Equipment TypeShaffer 13-5/8" 10M LXT Ram BOP
Working Pressure10,000 psi
Components IncludedRetainer Ring (20039755), Polypak Seal (031362), Gland (20039467), Wiper Ring (20023476)

Dimensions

ParameterDetail
Shaft Diameter4.5" (Matches RSSA)
Assembly PositionInside the cylinder head at the rear
Quantity Required2 per single BOP, 4 per double BOP

Structure / Working Principle

The TSSA is located inside the cylinder head at the rear of the LXT BOP. It seals the tail end of the ram shaft to prevent hydraulic fluid from leaking out of the cylinder during operation.

Cross-Reference & Replacement

When replacing the TSSA, it is highly recommended to inspect the Ram Shaft Seal Assembly (RSSA) and have the complete door seal kit on hand.

Related Components:

Selection Support

Not sure if this seal fits your LXT door assembly? Provide your BOP serial number and assembly part number (e.g., 20033094). HYRIG will confirm the exact configuration.

Applications

Suitable for Shaffer 13-5/8" 10,000 psi LXT Ram BOPs during cylinder maintenance.

Spare Parts

HYRIG provides replacement tail shaft seal assemblies and related soft goods for Shaffer LXT BOPs.

Frequently Asked Questions

Where is the TSSA located?

It is located inside the cylinder head at the rear, sealing the tail shaft.

What is included in the 20033119 assembly?

The assembly includes the retainer ring, polypak seal, gland, and wiper ring.

Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.

Contact

HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Shaffer 20033119 tail shaft seal assembly. For selection support, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit