Cameron Type U vs U II vs UM — Interchangeability Guide | HYRIG

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Selecting aftermarket components for Cameron BOPs requires distinguishing between the original Type U, the improved U II, and the UM variant. This guide outlines HYRIG compatibility standards for thes
Conatct For Details
DetailReview(0)Additional

Key Facts

  • Applies To: Cameron Type U, Type U II, and Type UM BOPs
  • BOP Bore: 7 1/16" (this parts program targets the original Type U)
  • Standards: API 16A, NACE MR0175 / ISO 15156
  • Quality Control: Dimensional inspection reports (DIR) with each batch
  • Traceability: All elastomers and metals fully traceable to manufacturing lots

Compatibility by Nameplate

Nameplate ModelHYRIG Recommendation
Cameron Type UAll components on our Type U pages are direct drop-in replacements
Cameron Type U IIRam blocks and packers generally share dimensions; verify bonnet seal geometries (updated for subsea use)
Cameron Type UMContact HYRIG with serial number; specific metallurgical and sealing requirements

Fitment Check

ConditionAction
Your BOP nameplate states 'Type U'All HYRIG Type U page components are direct drop-in replacements
Your BOP nameplate states 'Type U II'Verify bonnet seal geometries; ram blocks and packers often share dimensions
Your BOP nameplate states 'Type UM'Contact HYRIG with serial number before ordering

Common field error: Assuming a Type U packer is compatible with a Type U II BOP without checking the serial number and parts list, as transitional models exist in the field.

Related Pages

Contact

For compatibility verification, email info@hyrig.com with:

  • BOP nameplate photo (Model and Serial Number)
  • Current parts list or required P/N
  • Quantity
Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit