Overview & Definition
The Chemical Dosing Pump is an API 610 Type OH2 horizontal, single‑stage, overhung, centerline‑mounted centrifugal pump specifically engineered for low flow, high head chemical injection and dosing applications in petrochemical, water treatment, and industrial processing facilities. The pump fully complies with API 610 11th Edition and ISO 13709 standards.
In chemical dosing service, the pump delivers precise volumes of treatment chemicals such as corrosion inhibitors, scale inhibitors, biocides, pH adjusters, coagulants, flocculants, and catalyst additives into process streams. While positive displacement pumps are often used for dosing, OH2 centrifugal pumps offer simplicity, lower maintenance, and smooth continuous flow for duties with stable system resistance and moderate turndown requirements.
The OH2 configuration — radially split casing, end‑suction top‑discharge, back pull‑out design — provides compact footprint, easy maintenance, and API 682 seal chamber compatibility for zero‑leakage handling of hazardous chemicals.
As a specialized China API 610 pump manufacturer, we produce chemical dosing pumps with small flow, high head hydraulics and corrosion‑resistant alloy wetted parts.
Media Compatibility
| Medium | Suitability |
|---|---|
| Corrosion inhibitors | Excellent – 316SS / duplex / Alloy 20 |
| Scale inhibitors | Excellent – 316SS |
| Biocides / Oxidizing chemicals | Good – requires high alloy (Hastelloy, titanium) |
| pH adjusters (acids, caustic) | Excellent – with appropriate alloys |
| Coagulants / Flocculants | Excellent – 316SS |
| Catalyst additives | Excellent – depending on composition |
| Amine solutions | Excellent – 316SS |
| Any corrosive or hazardous chemicals | With Alloy 20, Hastelloy, titanium, PTFE gaskets |
Product Parameters
| Parameter | Range |
|---|---|
| Flow rate (Q) | 0.5 ~ 50 m³/h (typical dosing range) |
| Total head (H) | 50 ~ 300 m |
| Operating temperature | -40°C ~ +200°C |
| Design pressure | Up to 7.5 MPa (75 bar) |
| Speed | 2,950 / 3,600 rpm (higher speeds for small flows) |
| Flange rating | ASME Class 150 / 300 / 600 |
| Casing | Radially split, centerline mounted |
| Impeller | Closed, trimmed for small diameter (high speed) |
Design Features
| Feature | Benefit |
|---|---|
| Back pull-out design | Rotating assembly removed without disturbing piping – seal/bearing maintenance without disconnecting dosing lines |
| Centerline mounting | Accommodates thermal expansion when handling warm chemicals |
| High speed operation | Small impeller diameter achieves high head at low flow – ideal for dosing |
| Radially split casing | Simple, leak‑tight construction for hazardous chemicals |
| Closed impeller | Dynamically balanced; renewable wear rings extend life |
| API 682 seal chamber | Accepts single, tandem, or double cartridge seals – Plan 11/52/53B for zero leakage |
| Corrosion resistant materials | 316L SS, duplex, Alloy 20, Hastelloy, titanium, PTFE/FFKM gaskets |
| Heavy duty shaft | Minimizes deflection at high speed; extends seal life |
| Low NPSH design (optional) | Inducer or larger suction for limited suction head |
Materials of Construction
| Component | Standard (Mild Chemicals) | Upgrade (Corrosive / Hazardous) |
|---|---|---|
| Casing | 304SS / 316L SS | Alloy 20 / Hastelloy C‑276 / Titanium |
| Impeller | 304SS / 316L SS | Alloy 20 / Hastelloy / Titanium |
| Shaft | 17-4PH SS | Duplex / Alloy 20 / Hastelloy |
| Wear rings | 316SS with Stellite | Tungsten carbide / Silicon carbide |
| Bolting | A193 B8M (316SS) | Hastelloy / Monel |
| Gaskets / O‑rings | PTFE | FFKM (Kalrez) / PTFE |
Selection Guidelines
Step 1: Define Dosing Duty
Flow rate: typically 0.5 ~ 30 m³/h
Discharge pressure / head: 50 ~ 300 m
Fluid composition and corrosivity
Temperature
NPSH available (often adequate from tank)
Step 2: Select Pump Size and Speed
For very low flow (<10 m³/h), high speed OH2 with small impeller
Locate rated point near BEP for stability
Step 3: Select Wetted Materials
316L SS for most chemicals
Alloy 20 or Hastelloy for acids (H₂SO₄, HNO₃, HCl)
Titanium for aggressive chlorides or oxidizing acids
Step 4: Specify Seal System
Single mechanical seal Plan 11 for non‑hazardous chemicals
Tandem seal Plan 52 for zero emissions (buffer fluid)
Double seal Plan 53B for highly toxic/corrosive fluids
Step 5: Auxiliary Features
Water cooled bearing housing if fluid >120°C
Casing drain for cleaning
Minimum flow recirculation (orifice) for low flow protection
Applications
| Industry | Chemical Dosing Service |
|---|---|
| Refining | Corrosion inhibitor injection into crude unit overhead; antifoulant dosing |
| Petrochemical | Catalyst injection; polymer additive dosing |
| Water treatment | pH adjuster (acid/caustic); coagulant; biocide; antiscalant |
| Boiler / Cooling tower | Oxygen scavenger; scale inhibitor; corrosion inhibitor |
| Chemical plants | Precise additive injection into reactors |
| Flue gas desulfurization | Lime/limestone slurry dosing (with open impeller option) |
Why Choose a China API 610 OH2 Dosing Pump Manufacturer?
Full API 610 11th Edition (ISO 13709) compliance
Small flow, high head design – ideal for chemical dosing where PD pumps are common but centrifugal offers simplicity
Corrosion resistant alloys – 316L, Alloy 20, Hastelloy, titanium available
API 682 seal chamber – zero leakage options for hazardous chemicals
Back pull-out maintenance – dosing lines remain undisturbed
Competitive cost – 20–30% lower than major Western brands
Lead time – 16–22 weeks for stainless steel configurations
Factory testing – hydraulic performance, mechanical run, NPSH
Documentation – curves, GA drawings, material certifications
Summary
| Parameter | Specification |
|---|---|
| Pump Type | API 610 Type OH2 – horizontal, single stage, overhung, centerline mounted |
| Medium | Various chemicals, inhibitors, additives, acids, caustics |
| Flow range | 0.5 ~ 50 m³/h (dosing / small flow) |
| Head range | 50 ~ 300 m |
| Temperature | -40°C to +200°C |
| Pressure rating | Up to 7.5 MPa (75 bar) |
| Casing | Radially split, end‑suction top‑discharge |
| Impeller | Closed, trimmed for small diameter, high speed |
| Materials | 316L SS / Alloy 20 / Hastelloy / Titanium |
| Seals | API 682 Plan 11/52/53B |
| Lubrication | Oil ring self‑lubricating |
| Certification | API 610 11th Edition / ISO 13709 |
For more information or a custom proposal for your chemical dosing pump (API 610 OH2) application, please contact us at:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.