The OH2 Chilled Water Pump is a heavy duty, API 610 (ISO 13709) Type OH2 horizontal overhung centrifugal pump specifically engineered for chilled water circulation in large industrial refrigeration systems, HVAC plants, petrochemical facilities, refineries, and process cooling applications. It reliably delivers low temperature water (typically 4°C to 12°C) to chillers, cooling coils, air handling units, and process heat exchangers.
Key Performance Parameters (Typical for Chilled Water Service)
Flow range: 20 – 1,500 m³/h (customizable based on cooling demand)
Head range: Up to 120 m (approximately 400 ft)
Speed: 1,450/1,750 RPM (preferred for low noise and long life) or 2,950/3,550 RPM
Power range: 7.5 – 315 kW (varies with flow and head)
Process Compatibility (Chilled Water Service)
Temperature range: -10°C to 30°C (14°F to 86°F) – suitable for chilled water and glycol mixtures.
Design pressure: Up to 20 bar (290 psi) – compatible with typical closed loop cooling systems.
Media handled: Chilled water, chilled glycol/water mixtures, brine solutions, industrial cooling water.
Wetted materials: Carbon steel (S-1) – standard; 316 stainless steel (S-6) optional for corrosive or high purity water service.
Reliability & Efficiency
Sealing system: Mechanical seal (single cartridge) with flush plan – typically Plan 11 (internal recirculation) or Plan 21 (cooling). For low temperature applications, Plan 32 (external flush) optional to prevent ice formation.
Hydraulic efficiency: ≥78% at best efficiency point (BEP) – optimized for continuous operation at moderate head.
NPSHr: ≤3.5 m – low NPSH requirement critical for closed loop systems with limited suction head.
MTBF: ≥8000 hours – supports long term continuous operation.
Mechanical Design (API 610 OH2 Features for Chilled Water Service)
Configuration: Single stage, overhung, horizontal, centerline mounted, radially split casing.
Inlet/Outlet: Suction up to 300 mm (12″), discharge up to 200 mm (8″) – customizable based on flow.
Flange rating: Class 150 RF (ANSI/ASME) or PN 16 – adequate for typical chilled water pressures.
Design standard: API 610 11th/12th edition (ISO 13709) – full compliance.
Centerline mounting: Provides stability and reduces thermal stresses; however, for low temperature service, foot mounted options are also acceptable.
Rotor support: Rigid shaft with minimal deflection – extends seal and bearing life.
Bearing housing: Fan cooled (standard) – suitable for low temperature ambient conditions; grease or oil lubrication optional.
Maintenance: Back pull-out design – pump internals removable without disturbing piping or driver.
Impeller: Closed radial, dynamically balanced, double wear rings for sustained efficiency.
Casing: Radially split, self-venting design with discharge flange positioned upward.
Why Choose This OH2 Chilled Water Pump?
For large scale chilled water circulation in industrial refrigeration and HVAC systems, the OH2 pump delivers high efficiency, low NPSHr, and API 610 reliability. Its robust construction, flexible material options, and back pull-out maintenance access make it a cost‑effective, long‑life solution for continuous duty cooling applications.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, operating temperature, and fluid (chilled water or glycol mixture) for a precise recommendation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.