Fourth Reactor Quench Pump OH2

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The OH2 fourth reactor quench pump is an API 610 Type OH2 horizontal overhung centrifugal pump designed for quench service in multi‑bed hydroprocessing reactors (e.g., fourth reactor). Flow range 10-400 m³/h, head up to 350 m, temperature range 50°C to 250°C, design pressure up to 150 bar. Centerline mounted for high temperature. Mechanical seal with API Plan 21/23/53. Hydraulic efficiency ≥70%, MTBF ≥8000 hours. Reliable injection of quench medium to control reactor bed temperature.

Conatct For Details
DetailReview(0)Additional

The OH2 Fourth Reactor Quench Pump is a heavy duty, API 610 (ISO 13709) Type OH2 horizontal overhung centrifugal pump specifically engineered for quench service in multi‑bed hydroprocessing reactors – including hydrocrackers, hydrotreaters, and catalytic reformers – with a particular focus on the fourth (or final) reactor bed. It reliably injects a quench medium (typically hydrogen‑rich recycle gas, wash water, or liquid hydrocarbon) between catalyst beds to control exothermic reaction temperatures, protect catalyst integrity, and optimize reactor performance.

Key Performance Parameters (Typical for Fourth Reactor Quench Service)

  • Flow range: 10 – 400 m³/h (depending on quench demand)

  • Head range: Up to 350 m (approximately 1,150 ft) – to overcome reactor differential pressure

  • Speed: 1,450/1,750 RPM or 2,950/3,550 RPM (based on duty point)

  • Power range: 15 – 200 kW (varies with flow, head, and quench medium density)

Process Compatibility (Reactor Quench Service)

  • Temperature range: 50°C to 250°C (122°F to 482°F) – suitable for hot quench streams.

  • Design pressure: Up to 150 bar (2,175 psi) – compatible with high pressure hydroprocessing reactor circuits.

  • Media handled: Hydrogen‑rich recycle gas, quench water, light hydrocarbon quench liquid, wash water, or mixtures.

  • Wetted materials: 316 stainless steel (S‑6) or duplex (S‑8) – for hydrogen service and corrosion resistance. Higher alloys (e.g., Alloy 20, Inconel) available for severe sour service.

Reliability & Efficiency

  • Sealing system: Mechanical seal (double or tandem) with API flush plans – typically Plan 23 (jacketed for high temperature) or Plan 53 (pressurized double seal with barrier fluid) for high pressure hydrogen service. Plan 21 (cooling) also common.

  • Hydraulic efficiency: ≥70% at best efficiency point (BEP)

  • NPSHr: Low NPSH design – critical for high temperature quench media.

  • MTBF: ≥8000 hours – essential for continuous reactor operation.

Mechanical Design (API 610 OH2 Features for Quench Service)

  • Configuration: Single stage, overhung, horizontal, centerline mounted, radially split casing.

  • Inlet/Outlet: Suction 2″–6″, discharge 1.5″–4″ (customizable based on flow)

  • Flange rating: Class 900, 1500, or 2500 RF (ANSI/ASME) – for high pressure service.

  • Design standard: API 610 11th/12th edition (ISO 13709) – full compliance.

  • Centerline mounting: Essential for high temperature service – maintains alignment during thermal growth.

  • Rotor support: Rigid, large diameter shaft with minimal deflection (<0.05 mm) – critical for high pressure hydrogen environment.

  • Bearing housing: Fan cooled or water cooled (for higher temperatures). Optional shaft‑mounted fan for elevated ambient conditions.

  • Seal chamber: API 682 compliant, sized for large bore cartridge mechanical seals to accommodate Plan 23/53.

  • Maintenance: Back pull‑out design – pump internals removable without disturbing piping or driver.

  • Material upgrade: Case hardening of shaft journals and bearing housings for hydrogen service (anti‑hydrogen embrittlement).

Why Choose This OH2 Fourth Reactor Quench Pump?

For fourth reactor quench service in high pressure hydroprocessing units, the OH2 pump delivers exceptional reliability, high temperature capability, and robust sealing for hydrogen‑rich environments. Its API 610 heavy duty construction, centerline mounting, and flexible high pressure material options make it the industry standard for critical reactor quench injection applications.

Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, quench medium (gas/liquid), operating temperature and pressure, and hydrogen content for a precise recommendation.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit