China VS5 Pump – API 610 Vertical Short Shaft Cantilever Submerged Pump (No Long Intermediate Shaft, Shallow Submersion, Low Failure Rate)

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
We are a professional China VS5 pump manufacturer producing API 610 vertical short shaft cantilever submerged pumps. No long intermediate shaft – the impeller is mounted on a short cantilever at the bottom. Designed for shallow submersion, small tanks, and low level liquid collection. Extremely reliable with low failure rate because there are no long shaft bearings. One‑stop service.

Conatct For Details
DetailReview(0)Additional

We are a professional China VS5 pump manufacturer, offering high‑quality API 610 compliant vertical short shaft cantilever submerged pumps. Our VS5 series features a short cantilever shaft at the bottom – there is no long intermediate shaft running up through a column. The impeller is mounted directly on a rigid cantilever shaft that extends a short distance below the pump head. This design is specifically intended for shallow liquid depths, small tanks, and low level liquid collection where traditional long‑shaft vertical pumps would be over‑complicated and unreliable. Because there are no long shaft bearings, the VS5 has an extremely low failure rate and requires minimal maintenance.

What is a VS5 Pump?

According to API 610, the VS5 pump is a vertical suspended, single‑stage, short shaft cantilever, submerged pump (sometimes called a “cantilever sump pump”). Key characteristics:

  • Short cantilever shaft – the pump shaft is short and rigid, extending only a short distance from the motor/pump head down to the impeller. No intermediate bearings are required.

  • No long intermediate shaft – eliminates the need for sleeve bearings along the length, which are a common failure point in long‑shaft pumps.

  • Shallow submersion – the pump is designed for liquid depths typically from a few hundred millimeters up to about 2 meters (maximum ~3 meters depending on design).

  • Single‑stage volute (or vortex) casing – robust, simple hydraulics.

  • Low failure rate – fewer parts, no long shaft bearings to wear or seize, no shaft whip.

  • Ideal for small tanks and collection pits – where the liquid depth is limited and access may be difficult.

Why Choose Our China VS5 Pump?

When you search for a reliable China VS5 pump manufacturer, you need a supplier who understands the advantages of a short cantilever design: simplicity, reliability, and suitability for shallow sumps. Our VS5 pumps are engineered for:

  • Shallow liquid depths (0.3 to 2.5 meters typical)

  • Small storage tanks, day tanks, and collection vessels

  • Low level liquid collection (draining sumps, pits, and containment areas)

  • Very low maintenance – no long shaft bearings to inspect or replace

  • Quick installation – the pump can be mounted directly on a tank cover or pit lid

  • Handling clean to slightly dirty liquids (water, light oil, mild chemicals)

Designed for Typical Working Conditions

Our China VS5 pumps run reliably in:

  • Small tank transfer (day tanks, receiving tanks, dosing tanks)

  • Low level collection sumps (basements, spill containment pits, equipment drains)

  • Shallow pits where long‑shaft pumps cannot be installed (depth < 2 meters)

  • Condensate collection from small vessels

  • Wastewater and drainage pits (clean to light solids, with appropriate impeller type)

  • Chemical tote and intermediate bulk container (IBC) unloading (with appropriate materials)

  • Continuous or intermittent operation at shallow depths

Compatible Media

The VS5 pump handles clean or lightly contaminated liquids:

  • Water (clean, cooling water, slightly dirty water)

  • Light oils (diesel, lubricating oil, hydraulic oil)

  • Mild chemicals (compatible with stainless steel or other alloys)

  • Condensate

  • Coolants, cutting fluids

  • Low viscosity liquids

**Avoid deep submersion (>3 meters) – the short cantilever shaft is not designed for long reach. For deeper tanks, use VS2/VS4 (long shaft).

Key Technical Features

  • Standard: API 610 (11th edition), API 682 for mechanical seal (at top)

  • Design: Vertical suspended, single‑stage, short shaft cantilever, no long intermediate shaft, single casing

  • Cantilever length: Typically 300 – 2500 mm (custom)

  • Flow: 1 – 200 m³/h (typical range 5‑150 m³/h)

  • Head: Up to 80 meters (single‑stage)

  • Submersion depth (liquid level above impeller): Minimum ~100 mm, maximum ~2500 mm

  • Temperature: -20°C to +120°C (higher with special materials)

  • Materials: Cast iron, carbon steel, stainless steel (304, 316), bronze, special alloys

  • Bearings: Only motor bearings and a single heavy‑duty bearing in the pump head (no submerged sleeve bearings)

  • Shaft sealing: Mechanical seal or gland packing at the top, above liquid level

  • Mounting: Top flange (tank cover, pit cover, or baseplate)

Product Advantages

  • No long intermediate shaft – eliminates the most common failure point in vertical submerged pumps. No sleeve bearings to lubricate, wear, or replace.

  • Extremely low failure rate – simple, robust design with few moving parts.

  • Ideal for shallow liquid depths – where long‑shaft pumps cannot be used due to minimum bearing spacing requirements.

  • Easy installation – just mount on a top plate, connect discharge piping, and lower into the liquid. No column assembly required.

  • Very low maintenance – no need to pull long shafts or replace multiple bearings. Routine seal and impeller checks are quick.

  • Cost‑effective – significantly lower cost than long‑shaft vertical pumps for shallow depth applications.

  • Compact and lightweight – easy to handle, store, and install in tight spaces.

  • API 610 compliance – built to API material and performance standards, ensuring reliability even in industrial service.

One‑Stop Full Service

As a leading China VS5 pump manufacturer, we provide a complete one‑stop service for short shaft cantilever pumps:

  1. Selection & hydraulic calculation – we confirm that your liquid depth is within the cantilever capability.

  2. Custom cantilever length – we build the exact shaft length needed for your tank or pit depth.

  3. Manufacturing – precision machining of short shaft, volute casing, impeller; dynamic balancing.

  4. Factory testing – hydrostatic test, performance test, mechanical seal check.

  5. Delivery – lead time for standard VS5 pumps: 6‑10 weeks (much faster than long‑shaft pumps).

  6. Installation & commissioning – simple mounting on customer’s tank cover; we provide guidance.

  7. After‑sales – spare impeller, volute, mechanical seal, short shaft assembly, fast support.

Main Applications

  • Small tank transfer (day tanks, feed tanks, mixing tanks)

  • Low level collection sumps (containment pits, equipment drains, basements)

  • Condensate recovery from small vessels or steam traps

  • IBC / tote unloading (with custom cantilever length to reach bottom of container)

  • Coolant and cutting fluid sump pumps in machine shops

  • Wastewater and drainage pits (shallow)

  • Chemical dosing tank transfer (small volumes)

  • Oil spill collection pits

Frequently Asked Questions (FAQ)

Q: What is the maximum submersion depth for a VS5 pump?
A: Typically up to 2.5 meters. For depths beyond 3 meters, the cantilever shaft becomes too long and flexible, leading to vibration and seal issues. For deeper applications, please consider our VS2 or VS4 long‑shaft pumps.

Q: Why does the VS5 have a lower failure rate than long‑shaft VS2/VS4 pumps?
A: Long‑shaft pumps require multiple intermediate sleeve bearings along the column. These bearings are lubricated by the pumped liquid and can fail if the liquid is dirty, if the level drops too low, or if the pump runs dry. The VS5 has no intermediate bearings – the shaft is short and rigid, supported only by the motor/pump head bearings. This dramatically reduces the failure rate.

Q: Can I use a VS5 pump for dirty water or small solids?
A: For water with small suspended solids (<5mm) or stringy material, we can supply a vortex impeller or open impeller version to reduce clogging. However, the short cantilever design has no intermediate bearings to foul, which is an advantage over long‑shaft pumps. Please specify your liquid condition.

Q: How do I install the VS5 in my existing tank?
A: You need a top mounting plate (cover) with a hole large enough for the pump body and cantilever shaft. The pump bolts to the plate, and the impeller and volute hang down into the liquid. Discharge piping connects to the pump head. We can provide a mounting flange or adaptor plate.

Q: Can the VS5 run dry for short periods?
A: Not recommended. The mechanical seal may overheat, and the pump could lose prime. However, because there are no intermediate bearings, a short dry run is less catastrophic than in a long‑shaft pump. Still, we strongly recommend a low‑level cutout switch.

Q: Do you offer explosion‑proof VS5 pumps for gasoline or solvents?
A: Yes. We can provide ATEX / IECEx / China Ex certified motors and pump construction with appropriate mechanical seals (API 682) and seal plans for volatile liquids.

Why Choose Us as Your China VS5 Pump Supplier

  • Specialized in short cantilever submerged pumps – we understand the reliability advantages of “no long shaft”

  • Fast delivery – typical lead time 6‑10 weeks, much faster than long‑shaft vertical pumps

  • Very competitive pricing – typically 30‑50% lower than European/US cantilever pump brands

  • True one‑stop service – from selection to installation guidance

  • Custom cantilever lengths – we build for your exact tank or pit depth

  • Low maintenance design – fewer parts means lower total cost of ownership

  • Full documentation – performance curves, material certificates, seal plans

Contact Us

For inquiries, technical support, or a custom quotation for our China VS5 pump (vertical short shaft cantilever, shallow submersion, small tank, low level collection), please contact us at:
info@hyrig.com

Choose our China VS5 pump – simple, reliable, and perfect for shallow liquid depths where long‑shaft pumps are overkill.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit