The BB2 Circulation Water Pump is a heavy duty, API 610 (ISO 13709) Type BB2 horizontal, radially split, between‑bearings centrifugal pump specifically engineered for large volume water circulation in industrial cooling systems, power plants, petroleum refineries, petrochemical complexes, and manufacturing facilities. It reliably delivers water – including cooling water, process water, condenser circulating water, and closed loop system water – to heat exchangers, cooling towers, condensers, and other process equipment.
Key Performance Parameters (Typical for Water Circulation Service)
Flow range: 50 – 2,500 m³/h (customizable based on system demand)
Head range: Up to 250 m (approximately 820 ft)
Number of stages: Single stage or two‑stage (depending on head requirement)
Speed: 1,450/1,750 RPM or 2,950/3,550 RPM
Power range: 30 – 1,600 kW (varies with flow, head, and water density)
Process Compatibility (Water Circulation Service)
Temperature range: -20°C to 150°C (-4°F to 302°F) – suitable for chilled water to hot process water.
Design pressure: Up to 30 bar (435 psi) – compatible with typical water circulation system pressures.
Media handled: Cooling water, process water, condenser water, chilled water, heated water, raw water, and treated water.
Wetted materials: Carbon steel (C‑6) – standard for clean water; 316 stainless steel (S‑6) for corrosive or high purity water; duplex (S‑8) for brackish or chlorinated water.
Reliability & Efficiency
Sealing system: Mechanical seal (single cartridge) with API flush plans – typically Plan 11 (internal recirculation) or Plan 21 (cooling). Plan 53 optional for double seal on environmentally sensitive applications.
Hydraulic efficiency: ≥80% at best efficiency point (BEP) – BB2 design offers excellent efficiency for high flow water services.
NPSHr: Low NPSH characteristics – single stage double suction impeller (if specified) provides minimal NPSH requirement.
MTBF: ≥8000 hours – supports continuous 24/7 operation.
Mechanical Design (API 610 BB2 Features for Water Circulation)
Configuration: Single stage (or two‑stage), horizontal, radially split, between‑bearings casing – heavy wall construction for high pressure and long life.
Casing type: Radially split (barrel or segmental ring type) – provides excellent pressure containment and durability.
Inlet/Outlet: Suction and discharge flanges located on the casing – typically top‑top orientation with flanges sized for high flow (suction up to 500 mm / 20″).
Flange rating: Class 150 or Class 300 RF (ANSI/ASME) – adequate for water circulation pressures.
Design standard: API 610 11th/12th edition (ISO 13709) – full compliance.
Rotor: Single stage closed impeller (optionally double suction for axial thrust balance and lower NPSHr). Dynamically balanced to ISO 1940 Grade G2.5.
Shaft: Large diameter, rigid shaft supported by bearings at both ends – minimal deflection.
Bearings: Heavy duty rolling element bearings (or hydrodynamic bearings for larger sizes). Oil lubrication (splash or forced) with optional cooling.
Seal chamber: API 682 compliant, sized for cartridge mechanical seals.
Maintenance: Radial split design – end cover removal allows access to rotor without disturbing major piping.
Wear rings: Renewable casing and impeller wear rings to maintain hydraulic efficiency.
Why Choose This BB2 Circulation Water Pump?
For large scale water circulation in industrial cooling and process systems, the BB2 pump delivers outstanding hydraulic efficiency, API 610 reliability, and long service life. Its robust between‑bearings construction, high flow capability, and low NPSHr make it the ideal choice for critical water circulation duties in refineries, power plants, and petrochemical facilities.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, water temperature, and application details (cooling tower, condenser, or process loop) for a precise recommendation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.