The BB2 Solution Circulation Pump is a heavy duty, API 610 (ISO 13709) Type BB2 horizontal, radially split, between‑bearings centrifugal pump specifically engineered for continuous circulation of process solutions in chemical plants, petrochemical complexes, refineries, and industrial manufacturing facilities. It reliably handles a wide range of solutions – including solvents, caustics, acids, brines, chemical intermediates, and heat transfer fluids – maintaining consistent flow and pressure in closed loop circulation systems.
Key Performance Parameters (Typical for Solution Circulation Service)
Flow range: 10 – 800 m³/h (customizable based on circulation demand)
Head range: Up to 600 m (approximately 1,970 ft) – for high pressure circulation loops
Number of stages: 1 to 8 stages (depending on required head)
Speed: 1,450/1,750 RPM or 2,950/3,550 RPM
Power range: 15 – 1,000 kW (varies with flow, head, and solution density)
Process Compatibility (Solution Circulation Service)
Temperature range: -40°C to 350°C (-40°F to 662°F) – suitable for cryogenic solvents to high temperature heat transfer fluids.
Design pressure: Up to 250 bar (3,625 psi) – compatible with high pressure circulation loops.
Media handled: Solvents (acetone, methanol, toluene), caustic solutions (NaOH, KOH), acids (dilute H₂SO₄, HCl, H₃PO₄), brines, chemical intermediates, heat transfer oils, catalyst slurries, and other process solutions.
Wetted materials: Carbon steel (C‑6) – standard for non‑corrosive solutions; 316 stainless steel (S‑6) for corrosive service; duplex (S‑8) for chloride or sour service; Alloy 20, Hastelloy, or titanium for highly aggressive chemicals.
Reliability & Efficiency
Sealing system: Mechanical seal (single, double, or tandem) with API flush plans – typically Plan 11, 21, 23, 52, or 53 based on solution properties and environmental requirements.
Hydraulic efficiency: ≥70% at best efficiency point (BEP) – multistage design provides excellent efficiency at high heads.
NPSHr: Low NPSH design – critical for circulation systems with limited suction head.
MTBF: ≥8000 hours – supports continuous 24/7 circulation.
Mechanical Design (API 610 BB2 Features for Solution Circulation)
Configuration: Single stage or multistage, horizontal, radially split (barrel or segmental ring type), between‑bearings casing – heavy wall construction for high pressure containment.
Inlet/Outlet: Suction and discharge flanges located on the casing – typically top‑top or side‑side orientation.
Flange rating: Class 150, 300, 600, 900, 1500 RF (ANSI/ASME) – based on design pressure.
Design standard: API 610 11th/12th edition (ISO 13709) – full compliance.
Rotor: Single or multiple impellers mounted on a shaft supported by bearings at both ends. Impellers may be arranged in opposed orientation for axial thrust balance. Dynamically balanced to ISO 1940 Grade G2.5.
Diffusers: Stationary diffusers between stages convert velocity to pressure with high efficiency.
Shaft: Large diameter, rigid shaft with minimal deflection – supported by heavy duty radial bearings.
Bearings: Hydrodynamic tilting pad journal bearings or heavy duty rolling element bearings. Oil lubrication (splash or forced) with optional cooling.
Seal chamber: API 682 compliant, sized for cartridge mechanical seals; large bore recommended for high temperature.
Interstage bushings: Replaceable bushings to control leakage between stages.
Maintenance: Radial split design – end cover removal allows access to rotor; the entire rotating assembly can be withdrawn axially for overhaul.
Wear rings: Renewable hardened wear rings on impellers and diffusers to maintain hydraulic efficiency and resist erosion from abrasive solutions.
Why Choose This BB2 Solution Circulation Pump?
For demanding solution circulation applications requiring high pressure, wide temperature range, and corrosion resistance, the BB2 pump delivers exceptional reliability and efficiency. Its API 610 radial split construction, multistage capability, and flexible material selection (from carbon steel to high alloys) make it the preferred choice for critical circulation loops in chemical processing, refining, and industrial manufacturing.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, solution composition (chemical, concentration, pH), operating temperature and pressure, and circulation loop details for a precise recommendation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.