The Gas Condensate Pump OH2 is a heavy duty, API 610 (ISO 13709) Type OH2 horizontal overhung centrifugal pump specifically engineered for transferring natural gas condensate, wet gas liquids (WGL), and light hydrocarbon mixtures in gas processing plants, oil & gas production facilities, refineries, and petrochemical units. It reliably pumps condensate – a mixture of pentanes, hexanes, and heavier hydrocarbons recovered from natural gas – from separation vessels, stabilizers, and storage to downstream processing or pipeline systems.
Key Performance Parameters (Typical for Gas Condensate Service)
Flow range: 10 – 600 m³/h (customizable based on condensate production rate)
Head range: Up to 250 m (approximately 820 ft)
Speed: 1,450/1,750 RPM or 2,950/3,550 RPM
Power range: 7.5 – 280 kW (varies with flow, head, and condensate density)
Process Compatibility (Gas Condensate Service)
Temperature range: -60°C to 120°C (-76°F to 248°F) – suitable for cold low‑temperature condensate to warm stabilizer feed.
Design pressure: Up to 50 bar (725 psi) – compatible with high pressure separation and pipeline systems.
Media handled: Natural gas condensate (C5+ hydrocarbons), wet gas liquids, light hydrocarbon mixtures, unstabilized condensate, stabilized condensate, and associated hydrocarbon liquids.
Wetted materials: Carbon steel (S-1) – standard for non‑sour condensate; 316 stainless steel (S-6) for corrosive or sweet service; duplex (S-8) for sour service (H₂S) or high chlorides.
Reliability & Efficiency
Sealing system: Mechanical seal (single or double cartridge) with API flush plans – typically Plan 11, 21, or 52/53. Double seal recommended for volatile hydrocarbon service to prevent emissions.
Hydraulic efficiency: ≥72% at best efficiency point (BEP)
NPSHr: Low NPSH design – critical for condensate service where suction may be from low pressure separators or atmospheric tanks.
MTBF: ≥8000 hours – supports continuous 24/7 field operation.
Mechanical Design (API 610 OH2 Features for Gas Condensate Service)
Configuration: Single stage, overhung, horizontal, centerline mounted (for temperature stability) or foot mounted (for lower temperatures), radially split casing.
Inlet/Outlet: Suction 2″–8″, discharge 1.5″–6″ (customizable based on flow)
Flange rating: Class 150, 300, 600, or 900 RF (ANSI/ASME) – based on design pressure.
Design standard: API 610 11th/12th edition (ISO 13709) – full compliance.
Rotor support: Rigid shaft with minimal deflection – extends mechanical seal and bearing life.
Bearing housing: Fan cooled (standard); water cooling optional for higher temperature service.
Seal chamber: API 682 compliant, sized for cartridge mechanical seals.
Maintenance: Back pull-out design – pump internals removable without disturbing suction/discharge piping or driver.
Impeller: Closed radial, dynamically balanced, with renewable wear rings (hard coated options for erosion resistance).
Casing: Radially split, self‑venting design with discharge flange positioned upward.
Why Choose This OH2 Gas Condensate Pump?
For gas condensate transfer and stabilization feed, this OH2 pump delivers reliable, low‑maintenance performance with API 610 heavy duty construction. Its low NPSHr, wide material selection for sour service, and robust sealing make it the ideal choice for safe and efficient handling of volatile hydrocarbon condensate in gas processing and oil & gas facilities.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, condensate composition (C5+ content, H₂S level), operating temperature, and suction conditions for a precise recommendation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.