The Deethanizer Reflux Pump OH2 is a heavy duty, API 610 (ISO 13709) Type OH2 horizontal overhung centrifugal pump specifically engineered for deethanizer tower overhead condensate reflux service in natural gas liquid (NGL) recovery plants, ethylene crackers, and refinery light ends units. It precisely returns condensed overhead liquid to the top of the deethanizer column, maintaining the vapor‑liquid equilibrium required to achieve propane recovery ≥98% and high purity LPG products.
Key Performance Parameters (Typical for Deethanizer Reflux Service)
Flow range: 50 – 500 m³/h (customizable based on tower capacity)
Head range: Up to 200 m (approximately 655 ft)
Speed: 1,450/1,750 RPM or 2,950/3,550 RPM
Power range: 30 – 250 kW (varies with flow, head, and media density)
Process Compatibility (Deethanizer Reflux Service)
Temperature range: -40°C to 150°C (-40°F to 302°F) – suitable for cold tower overhead condensate (ethane/propane mixture) to moderate temperature excursions.
Design pressure: Up to 35 bar (507 psi) – compatible with typical deethanizer operating pressures.
Media handled: Ethane, propane, mixed light hydrocarbons (C1–C3), LPG, and hydrocarbon condensate.
Wetted materials: Carbon steel (S-1) – standard; 316 stainless steel (S-6) for higher corrosion resistance in sour or wet service; duplex (S-8) for high chloride or H₂S service.
Reliability & Efficiency
Sealing system: Mechanical seal (single or double cartridge) with API flush plans – typically Plan 11, 21, or 52/53. Double seal recommended for hydrocarbon service to prevent fugitive emissions.
Hydraulic efficiency: ≥75% at best efficiency point (BEP) – optimized for continuous reflux duty.
NPSHr: ≤5.5 m – low NPSHr for reliable operation with condensate from the overhead accumulator.
MTBF: ≥8000 hours – supports 24/7 continuous plant operation.
Mechanical Design (API 610 OH2 Features for Deethanizer Reflux)
Configuration: Single stage, overhung, horizontal, centerline mounted (for temperature stability), radially split casing.
Inlet/Outlet: Suction 4″–8″, discharge 2″–6″ (customizable based on flow)
Flange rating: Class 150, 300, or 600 RF (ANSI/ASME)
Design standard: API 610 11th/12th edition (ISO 13709) – full compliance.
Rotor support: Rigid shaft with minimal deflection – extends seal and bearing life.
Bearing housing: Fan cooled (standard); water cooling optional for higher temperature applications.
Seal chamber: API 682 compliant, sized for cartridge mechanical seals.
Maintenance: Back pull-out design – pump internals removable without disturbing piping or driver.
Impeller: Closed radial, dynamically balanced, with renewable wear rings (hard coated options for erosion resistance).
Casing: Radially split, self‑venting design with discharge flange positioned upward.
Why Choose This OH2 Deethanizer Reflux Pump?
For deethanizer reflux service requiring high reliability and precise flow control, the OH2 pump delivers API 610 heavy duty construction, excellent hydraulic efficiency, and robust hydrocarbon sealing. Its wide hydraulic coverage, low NPSHr, and flexible material options make it the preferred choice for maximizing propane recovery and ensuring stable deethanizer operation.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, operating temperature, and fluid composition for a precise recommendation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.