Recovery Overhung Pump for Solution OH2

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The OH2 recovery overhung pump for solution is an API 610 Type OH2 horizontal centrifugal pump designed for recovering, reclaiming, and recycling various process solutions in chemical plants, refineries, and industrial facilities. Flow range 10-1,200 m³/h, head up to 200 m, temperature range -40°C to 260°C, design pressure up to 40 bar. Wetted parts in carbon steel, 316SS, or duplex. Mechanical seal with API flush plans. Hydraulic efficiency ≥72%, MTBF ≥8000 hours. Reliable for solvent recovery, caustic reclaim, and solution transfer.

Conatct For Details
DetailReview(0)Additional

The Recovery Overhung Pump for Solution OH2 is a heavy duty, API 610 (ISO 13709) Type OH2 horizontal overhung centrifugal pump specifically engineered for recovering, reclaiming, and recycling process solutions in chemical plants, petrochemical complexes, refineries, and industrial processing facilities. It reliably handles a wide variety of solutions – including solvents, caustics, acids, brines, chemical intermediates, and reclaimable liquids – transferring them from collection points back into the process or to storage for reuse.

Key Performance Parameters (Typical for Solution Recovery Service)

  • Flow range: 10 – 1,200 m³/h (customizable based on recovery rate)

  • Head range: Up to 200 m (approximately 655 ft)

  • Speed: 1,450/1,750 RPM or 2,950/3,550 RPM

  • Power range: 7.5 – 355 kW (varies with flow, head, and solution density)

Process Compatibility (Solution Recovery Service)

  • Temperature range: -40°C to 260°C (-40°F to 500°F) – suitable for cryogenic solvents to hot caustic reclaim.

  • Design pressure: Up to 40 bar (580 psi) – compatible with recovery loop pressures.

  • Media handled: Solvents (acetone, methanol, toluene), caustic solutions (NaOH, KOH), acids (dilute H₂SO₄, HCl), brines, chemical intermediates, catalyst solutions, and reclaimable process liquids.

  • Wetted materials: Carbon steel (S-1) – standard for non‑corrosive solutions; 316 stainless steel (S-6) for corrosive or high purity service; duplex (S-8) for chloride‑containing or sour service; Alloy 20 or Hastelloy for highly aggressive acids.

Reliability & Efficiency

  • Sealing system: Mechanical seal (single, double, or tandem) with API flush plans – typically Plan 11, 21, or 52/53 depending on solution corrosivity and environmental requirements. PTFE / FFKM seal faces recommended for aggressive chemicals.

  • Hydraulic efficiency: ≥72% at best efficiency point (BEP)

  • NPSHr: Low NPSH design – critical for recovery applications where suction may be from atmospheric tanks or low pressure vessels.

  • MTBF: ≥8000 hours – supports continuous or intermittent recovery operations.

Mechanical Design (API 610 OH2 Features for Solution Recovery Service)

  • Configuration: Single stage, overhung, horizontal, foot mounted (for lower temperatures) or centerline mounted (for high temperature), radially split casing.

  • Inlet/Outlet: Suction 2″–8″, discharge 1.5″–6″ (customizable based on flow)

  • Flange rating: Class 150, 300, or 600 RF (ANSI/ASME)

  • Design standard: API 610 11th/12th edition (ISO 13709) – full compliance.

  • Rotor support: Rigid shaft with minimal deflection – extends mechanical seal and bearing life.

  • Bearing housing: Fan cooled (standard); water cooling optional for high temperature solutions.

  • Seal chamber: API 682 compliant, sized for cartridge mechanical seals; large bore recommended for high temperature or corrosive service.

  • Maintenance: Back pull-out design – pump internals removable without disturbing suction/discharge piping or driver.

  • Impeller: Closed radial, dynamically balanced, with renewable wear rings (hard coated or alloy options for abrasive solutions).

  • Wear rings: Renewable casing and impeller wear rings – material selection based on solution abrasiveness.

Typical Applications (Solution Recovery)

  • Solvent recovery systems – recovering organic solvents from distillation bottoms, stripping columns, or condensate streams

  • Caustic reclaim – pumping recovered caustic from regeneration loops back to process

  • Acid recovery – transferring dilute or spent acids to neutralization or regeneration units

  • Brine recirculation – handling brine solutions in chlor‑alkali or water treatment recovery

  • Chemical intermediate recovery – reclaiming valuable chemical intermediates from process waste streams

  • Catalyst solution recovery – recovering liquid catalyst solutions from reactors or separation vessels

  • Wash solution recycling – circulating cleaning or extraction solutions for reuse

Why Choose This OH2 Recovery Overhung Pump for Solution?

For solution recovery, reclaim, and recycle applications, this OH2 pump delivers reliable, corrosion‑resistant, and energy‑efficient performance. Its API 610 heavy duty construction, wide hydraulic coverage, flexible material selection (including high alloys), and low NPSHr make it the ideal choice for recovering valuable process solutions, reducing waste, and improving plant economics.

Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, solution composition (chemical, concentration, pH), operating temperature, and suction conditions for a precise recommendation.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit