Crown Block Series | TC Models for Drilling Rigs
Overview:
HYRIG can supply the complete crown block series and their spare parts. This range includes TC models with load capacities from 900 kN to 9000 kN, designed to be mounted at the top of the mast and guide the drilling line.
| Model | Max Load (kN) | Sheaves | Sheave O.D. (mm) | Wire Line Dia. (mm) |
|---|---|---|---|---|
| TC90 | 900 | 5 | 762 | 26 |
| TC170 | 1700 | 6 | 1005 | 29 |
| TC225 | 2250 | 6 | 1120 | 32 |
| TC315 | 3150 | 7 | 1270 | 35 |
| TC450 | 4500 | 7 | 1524 | 38 |
| TC675 | 6750 | 8 | 1524 | 45 |
| TC900 | 9000 | 8 | 1829 | 48 |
Data source: Technical data table.
The overall dimensions vary by model. The crown block is designed with a closed or open type frame. The sheave groove conforms to API RP 9B requirements.
The crown block is mounted at the top of the mast. It contains multiple sheaves that guide the drilling line between the drawworks and the traveling block. The fast-line sheave and dead-line sheave are designed to handle the highest speeds and loads.
Selecting the correct crown block requires matching the number of sheaves and the drilling line diameter to your traveling block and drawworks.
Tell us your line size and load capacity, and our engineers will assist.
Used in the hoisting system of drilling rigs to support the drilling line and guide it to the drawworks.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including sheaves, bearings, and shafts. Please visit our Hoisting Equipment Parts page.
Specifications:
FAQ:
Contact Us:
For crown block selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.