TC315 Crown Block | 315 Ton & 7 Sheaves
Overview:
HYRIG can supply the TC315 crown block and its spare parts. The TC315 features a maximum load capacity of 3150 kN (315 tons), a 7-sheave design, and a sheave outer diameter of 1270 mm, designed for heavy-duty drilling operations.
| Model | Max Load (kN) | Sheaves | Sheave O.D. (mm) | Wire Line Dia. (mm) | Weight (kg) |
|---|---|---|---|---|---|
| TC225 | 2250 | 6 | 1120 | 32 | 6500 |
| TC315 | 3150 | 7 | 1270 | 35 | 8500 |
| TC450 | 4500 | 7 | 1524 | 38 | 11105 |
Data source: Technical data table.
| Dimension Item | Specification |
|---|---|
| Overall Dimension (L x W x H) | 3192 x 2783 x 2350 mm |
| Weight | 8500 kg |
| Sheave Groove | Quenched treatment per API RP 9B |
The TC315 crown block is mounted at the top of the mast. It guides the drilling line between the drawworks and the traveling block. The 7-sheave design provides a 7x6 stringing system. The sheave grooves are quenched for wear resistance.
When replacing a crown block, ensure the number of sheaves (7) matches the traveling block (typically 6) and the drawworks. The 35 mm wire line diameter must be compatible with your existing drilling line.
Need to match a crown block with your traveling block? Tell us your line size and load capacity, and our engineers will assist. For lighter loads, view the TC225 Crown Block.
Used in the hoisting system of drilling rigs to support the drilling line and guide it to the drawworks.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including sheaves, bearings, and shafts. Please visit our Hoisting Equipment Parts page.
Specifications:
FAQ:
Contact Us:
For TC315 crown block selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.