Drawworks Series | JC Models for Drilling Rigs
Overview:
HYRIG can supply the complete drawworks series and their spare parts. This range includes JC models with power ratings from 210 kW to 1470 kW, designed for lifting and lowering the drill string and casing in drilling rigs.
| Model | Max Input Power (kW) | Max Fast-line Pull (kN) | Wire Rope Dia. (mm) | Drum Size (D x W) (mm) |
|---|---|---|---|---|
| JC10B | 210 | 80 | 22 | 400 x 650 |
| JC15DB | 500 | 150 | 26 | 473 x 900 |
| JC30B | 440 | 210 | 29 | 560 x 1304 |
| JC40B | 735 | 280 | 32 | 640 x 1208 |
| JC50 | 1100 | 350 | 35 | 685 x 1160 |
| JC50D | 1100 | 350 | 35 | 770 x 1310 |
| JC70B | 1470 | 487 | 38 | 770 x 1310 |
| JC70D | 1470 | 487 | 38 | 770 x 1310 |
Data source: Technical data table.
The overall dimensions and weight vary by model. The drawworks can be equipped with an inner or external speed regulation mechanism. The main brake can be a band brake or a hydraulic disc brake.
The drawworks is the main hoisting mechanism of the rig. It converts the rotary power of the engine or motor into the linear motion of the drilling line, lifting and lowering the traveling block and drill string. It includes the drum, brake system, and transmission mechanism.
Selecting the correct drawworks requires matching the power rating and fast-line pull to your rig depth and maximum hook load.
Tell us your rig depth and power source, and our engineers will assist.
Used in the hoisting system of drilling rigs to lift and lower the drill string, casing, and other downhole tools.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including brake discs, clutch components, and drum bearings. Please visit our Drawworks Parts page.
Specifications:
FAQ:
Contact Us:
For drawworks selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.