| Model | Nominal Size | Max Flow (L/min) | Max Pressure | Control Type |
|---|---|---|---|---|
| DA50 | DN10 to DN30 | Up to 600 | 31.5 MPa | Pilot-operated |
| DAW50 | DN10 to DN30 | Up to 600 | 31.5 MPa | Solenoid |
Data source: Technical data table.
Text-based mounting parameters for the DA/DAW 50 series:
| Parameter | Specification |
|---|---|
| Mounting Type | Subplate |
| Port Connections | A, P, T, Y (O-ring sizes vary) |
| Weight | 2.8 to 13.5 kg |
The DA50 is a pilot-operated unloading valve. It switches between charging (P to A) and unloading (P to T) based on system pressure. The DAW50 adds a directional valve for electrical unloading.
`DA` or `DAW` + `Size` + `A/B` + `50` + `Pressure Range` + `Y`.
Used for energy saving in large hydraulic systems with accumulators and in dual-pump systems.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help choosing the correct pressure range or control type? Contact our engineers with your system specifications.
Q: What is the maximum flow rate for the DA/DAW 50 series?
A: The maximum flow rate is up to 600 L/min.
Q: Is the DAW50 solenoid replaceable?
A: Yes, the solenoid coil is replaceable without draining the hydraulic oil.
Q: Can I adjust the unloading pressure?
A: Yes, the unloading pressure can be adjusted via the setting screw.
For DA/DAW 50 series unloading relief valve selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.