DA/DAW 30 Series Unloading Relief Valves | 31.5 MPa

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the DA/DAW 30 series unloading relief valve range and their spare parts. These valves are used to unload the pump in accumulator systems or high/low pressure pump systems. The DAW version includes a solenoid valve for electrical unloading.
Conatct For Details
DetailReview(0)Additional

Key Facts

  • Valve Type: Unloading Relief Valve
  • Nominal Sizes: DN10, DN20, DN30
  • Max Working Pressure: 31.5 MPa
  • Max Flow Rate: 250 to 600 L/min
  • Control Type: Pilot-operated (DA) or Solenoid (DAW)
  • Applications: Accumulator systems, high/low pump systems

DA/DAW 30 Series Specifications & Model Comparison

ModelNominal SizeMax Flow (L/min)Max PressureControl Type
DA10/20/30DN10 to DN30Up to 60031.5 MPaPilot-operated
DAW10/20/30DN10 to DN30Up to 60031.5 MPaSolenoid

Data source: Technical data table.

Dimensions

Text-based mounting parameters for the DA/DAW 30 series:

ParameterSpecification
Mounting TypeSubplate
Port ConnectionsA, P, T, Y (O-ring sizes vary)
Weight3.8 to 14.5 kg

Structure / Working Principle

The valve uses a pilot-operated spool. In an accumulator system, it switches from P to A (charging the accumulator) to P to T (unloading the pump) when the set pressure is reached. The DAW version uses a solenoid to override the pressure setting and unload the pump at any time.

How to Order (Model Code)

`DA` or `DAW` + `Size` + `A/B` + `30` + `Pressure Range` + `Y`.

  • Pressure Range: `90` (2-8 MPa), `160` (8-16 MPa), `315` (18-31.5 MPa).
  • Y: External drain for pilot oil.

Applications

Used in hydraulic systems with accumulators to save energy and reduce heat generation, and in systems with high/low pressure pumps.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Need help choosing between DA and DAW, or setting the pressure range? Contact our engineers with your system specifications.

Frequently Asked Questions

Q: What is the main function of an unloading valve?
A: It unloads the pump to the tank when the system is not demanding flow (e.g., when an accumulator is fully charged).

Q: What is the difference between DA and DAW?
A: DA is pressure-controlled. DAW includes a solenoid valve for electrical unloading.

Q: What is the Y port for?
A: The Y port is used for external drain of the pilot oil. It must be connected to the tank.

Contact

For DA/DAW 30 series unloading relief valve selection and spare parts, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit