| Model | Nominal Size | Max Flow (L/min) | Max Pressure | Control Oil Options |
|---|---|---|---|---|
| DZ50 | DN10 to DN30 | Up to 600 | 31.5 MPa | Internal / External |
| DZ30 Series | DN10 to DN30 | Up to 450 | 31.5 MPa | Internal / External |
Data source: Technical data table.
Text-based mounting parameters for the DZ50 series (Subplate):
| Parameter | Specification |
|---|---|
| Mounting Type | Subplate / Cartridge |
| Port Connections | A, B, X, Y (O-ring sizes vary) |
| Weight | 3.6 to 8.2 kg (subplate) |
The DZ50 operates similarly to the DZ30 but is optimized for higher flows. The valve remains closed until the pressure at port A exceeds the spring setting, then opens to port B to start the second actuator. Control oil can be internally or externally supplied and drained.
`DZ` + `Size` + `50` + `Control Oil (No mark/X/Y/XY)` + `M`.
Used in heavy machinery, presses, and large clamping circuits for reliable sequence control.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help choosing the correct control oil configuration? Contact our engineers with your circuit diagram.
Q: What is the difference between DZ30 and DZ50?
A: The DZ50 series is designed for higher flow rates and offers different pressure setting ranges.
Q: Can DZ50 be mounted as a cartridge valve?
A: Yes, cartridge mounting options are available for manifold integration.
Q: What is the maximum working pressure?
A: The maximum working pressure is 31.5 MPa.
For DZ50 series sequence valve selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.