| Model | Max Flow (L/min) | Max Pressure | Control Method | Pressure Stages |
|---|---|---|---|---|
| DB3U | 200 to 600 | 31.5 MPa | Solenoid | Up to 3 |
| DBT2U | 200 to 600 | 31.5 MPa | Remote | Up to 2 |
Data source: Technical data table.
Text-based mounting parameters for the DB3U/DBT2U:
| Parameter | Specification |
|---|---|
| Mounting Type | Subplate or Cartridge |
| Port Connections | A, B (Custom bolt pattern) |
| Weight | Approx. 7.8 to 9.8 kg |
The valve uses a main spool controlled by pilot pressure. A small directional solenoid valve (usually DN5 or DN6) directs pilot oil to one of several pilot relief valves. By energizing different solenoids, the system pressure can be switched between 2 or 3 preset levels. The DBT2U uses external pilot pressure lines for remote switching.
Select the valve type (DB3U/DBT2U), nominal size, mounting type, and pressure ranges.
Used in hydraulic systems that require multiple working pressures, such as hydraulic presses, injection molding machines, and testing equipment.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help configuring the pressure stages or solenoid voltage? Contact our engineers with your system specifications.
Q: What is the difference between DB3U and DBT2U?
A: DB3U uses an integrated solenoid valve for internal switching and can control up to 3 stages. DBT2U is remotely controlled and typically offers 2 stages.
Q: What is the maximum flow rate for the DN30 size?
A: The DN30 size supports a maximum flow rate of up to 600 L/min.
Q: Can the pressure stages be adjusted?
A: Yes, each individual pilot valve can be adjusted to set the different pressure stages.
For DB3U/DBT2U multi-stage relief valve selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.