DBET/DBETE Proportional Relief Valves | Up to 35 MPa

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the DBET and DBETE proportional pressure relief valve range and their spare parts. The DBET is a direct-operated valve requiring an external amplifier, while the DBETE features an integrated electronic control unit. Both handle pressures up to 35 MPa.
Conatct For Details
DetailReview(0)Additional

Key Facts

  • Valve Type: Direct-operated proportional pressure relief valve
  • Nominal Size: DN6
  • Max Working Pressure: 35 MPa
  • Max Flow Rate: 2 L/min
  • Electronics: External (DBET) or Integrated (DBETE)
  • Pressure Ranges: 5, 10, 20, 31.5, 35 MPa

DBET/DBETE Specifications & Model Comparison

ModelMax PressureMax Flow (L/min)ElectronicsPressure Ranges
DBET35 MPa2External Amplifier5, 10, 20, 31.5, 35 MPa
DBETE35 MPa2Integrated5, 10, 20, 31.5, 35 MPa
DBETR Valve31.5 MPa10External (with Feedback)2.5, 8, 18, 31.5 MPa

Data source: Technical data table.

Dimensions

Mounting parameters for the DBET/DBETE valves:

ParameterSpecification
Mounting InterfaceISO 4401-03 (CETOP 3)
Bolt Pattern4 x M5 threaded holes (40.5 x 40.5 mm)
Port ConnectionsP, T (Requires O-ring 9.25 x 1.78 mm)
WeightApprox. 4.0 kg

Structure / Working Principle

The proportional solenoid converts the electrical current into mechanical force, which acts on the poppet. When the hydraulic force exceeds the solenoid force, the poppet opens, allowing oil to flow from P to T and limiting the system pressure.

  • DBET: Requires an external amplifier (e.g., VT-2000) to control the solenoid current.
  • DBETE: Has a built-in amplifier, requiring only a 24V power supply and a command signal (0-10V).

How to Order (Model Code)

`DBET` or `DBETE` + `50` + `Pressure Range` + `Voltage` + `Connector`.

  • Pressure Range: `50` (5 MPa), `100` (10 MPa), `200` (20 MPa), `315` (31.5 MPa), `350` (35 MPa).
  • Voltage: `G24` (DC 24V).

Example: `DBETE-50/315G24Z4` = DN6, with integrated electronics, 31.5 MPa, DC 24V, Z4 connector.

Cross-Reference & Replacement

Replacing an old valve? Check:

  1. Electronics: Determine if your system has an external amplifier (DBET) or if you prefer an integrated solution (DBETE).
  2. Pressure Range: Ensure the selected range covers your system's maximum operating pressure.

Applications

Used in hydraulic power packs and machine tools for remote and programmable pressure control.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Need help deciding between DBET and DBETE, or selecting the correct pressure range? Contact our engineers with your system specifications.

Frequently Asked Questions

Q: What is the difference between DBET and DBETE?
A: The DBET requires an external amplifier. The DBETE has the amplifier built into the solenoid housing, simplifying wiring.

Q: What is the maximum flow rate for these valves?
A: Both the DBET and DBETE support a maximum flow rate of 2 L/min.

Q: Can I replace a DBET with a DBETE?
A: Yes, the hydraulic mounting interface is the same, but you will need to adjust the electrical wiring for the integrated amplifier.

Contact

For DBET/DBETE proportional pressure relief valve selection and spare parts, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit