| Model | Nominal Size | Max Flow (L/min) | Max Pressure | Max Pressure Protection |
|---|---|---|---|---|
| DBE10/20/30 | DN10 to DN32 | Up to 600 | 31.5 MPa | No |
| DBEM10/20/30 | DN10 to DN32 | Up to 600 | 31.5 MPa | Yes |
| DBET/DBETE Valve | DN6 | 2 | 35 MPa | No |
Data source: Technical data table.
Mounting parameters for the DBE/DBEM series (Subplate Type):
| Parameter | Specification |
|---|---|
| Mounting Interface | ISO 4401-05 to 08 (varies by size) |
| Port Connections | A, B, X, Y (O-ring sizes vary) |
| Weight | Approx. 2.6 kg to 8.4 kg (varies by size) |
The DBE valve uses a proportional solenoid to control a pilot poppet. System pressure acts on the main spool, which is controlled by the pilot pressure. When the system pressure exceeds the solenoid setting, the pilot poppet opens, causing the main spool to lift and relieve pressure. The DBEM version includes a mechanical maximum pressure protection valve that opens if the pressure exceeds a pre-set safe limit, protecting the system from electrical failure.
`DBE` or `DBEM` + `Size (10/20/30)` + `Control Type (No mark/Y/XY)` + `30` + `Pressure Range`.
Example: `DBEM20-30/315Y` = DN20, with max pressure protection, 31.5 MPa, external pilot drain.
Replacing an old valve? Check:
Used in large injection molding machines, hydraulic presses, and heavy machinery for programmable pressure control.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help choosing between DBE and DBEM, or configuring the pilot oil? Contact our engineers with your system schematic.
Q: What is the difference between DBE and DBEM?
A: The DBEM includes a mechanical maximum pressure protection valve to prevent system damage in case of electrical failure.
Q: What is the maximum flow rate for the DN32 size?
A: The DN32 size supports a maximum flow rate of up to 600 L/min.
Q: Does this valve require an external amplifier?
A: Yes, it requires a proportional amplifier (e.g., VT-2000 series) matched to the solenoid.
For DBE/DBEM proportional relief valve selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.