DF52-70B Dart Check Valve | API 6A 2" 10,000 psi

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the DF series check valve range. The DF52-70B is a manual, dart-type check valve with a 52 mm nominal bore, engineered to prevent backflow in high-pressure manifolds. It features a 2" FIG1502 hammer union connection and is manufactured to API 6A standards.
Conatct For Details
DetailReview(0)Additional

DF52-70B Dart Check Valve (52mm / 70 MPa)

HYRIG can supply the DF series check valve range. The DF52-70B is a manual, dart-type check valve with a 52 mm nominal bore, engineered to prevent backflow in high-pressure manifolds. It features a 2" FIG1502 hammer union connection and is manufactured to API 6A standards.

Key Facts

  • Valve Type: Dart Check Valve (B Type)
  • Nominal Diameter: 52 mm
  • Working Pressure: 70 MPa (10,000 psi)
  • Connection Type: 2" FIG1502 Hammer Union
  • Direction: Standard (Female to Male)
  • Manufacturing Standards: API 6A
  • Temperature Level: -29°C to 121°C (Level P-U)
  • Model Code Meaning: DF (Check Valve) - 52 (Bore) - 70 (Pressure) - B (Dart Type)

DF52 Series Specifications & Dimensions

Model NumberNominal DiameterPressure (MPa)L (mm)H or D (mm)Connection TypeType
DF52-70B52 mm704211392"FIG1502Dart
DF52-70G52 mm704842802"FIG1502Cover
DF52-105D52 mm1053582142"FIG1502Straight Baffle

Data source: Technical data table.
Need a different type? View the DF52-70G Cover Type or explore the full DF Check Valve Series.

Dimensions

The exact footprint for the DF52-70B is:

  • Face-to-Face (Length L): 421 mm
  • Height (H): 139 mm

The dart type has a more compact profile compared to the cover plate type. Verify your manifold clearance before ordering.

Structure & Working Principle

The DF52-70B utilizes a dart-type (B) internal mechanism. A dart-shaped poppet is pushed open by forward flow and is forced closed by a spring and reverse pressure to prevent backflow.

The standard direction allows flow from the female end to the male end. It is a compact and reliable solution for preventing reverse flow in 2-inch high-pressure lines.

Cross-Reference & Replacement

Replacing an older 2-inch check valve? Here is what to verify:

  1. Type: Confirm you need a Dart (B) type.
  2. Connection: Ensure the connection is exactly 2" FIG1502.
  3. Length: Verify your existing piping requires a 421 mm length.
  4. Flow Direction: This is standard direction (female to male). For reverse, choose an "F" model.

Applications

This valve is specifically suited for:

  • Wellhead Christmas trees.
  • Choke and kill manifolds.
  • Mud pump discharge lines.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Not sure if the Dart or Cover type is right for you? Tell us your maintenance preferences and space constraints, and our engineers will confirm the correct model.

Frequently Asked Questions

Q: What is the difference between B, G, and D types?
A: B is Dart type (compact poppet). G is Upper Cover Plate type (easier access to internals). D is Straight Baffle type (for high-pressure).

Q: What is the working pressure?
A: The DF52-70B is rated for 70 MPa (10,000 psi).

Q: What is the flow direction?
A: Standard direction, meaning flow goes from female to male.

Contact

For DF52-70B dart check valve selection, contact HYRIG: info@hyrig.com

Page last updated: 2026-11-08

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit