Diesel Stripper Bottoms Pump OHH1.5x3x13-1

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The Diesel Stripper Bottoms Pump OHH1.5x3x13-1 is an API 610 OHH type heavy duty horizontal centrifugal pump designed for diesel stripper bottom service in refineries. Rated flow 25 m³/h, rated head 130 m, temperature range up to 260°C, design pressure up to 40 bar. Wetted parts in carbon steel or 316 SS with hard facing. Mechanical seal with API flush plans (Plan 21/23). Hydraulic efficiency ≥65%, MTBF ≥8000 hours. It reliably transfers high temperature diesel bottoms to downstream storage or further processing.

Conatct For Details
DetailReview(0)Additional

The Diesel Stripper Bottoms Pump OHH1.5x3x13-1 is a rugged, API 610 OHH type horizontal centrifugal pump engineered specifically for high‑temperature diesel stripper bottom service in petroleum refineries. It reliably handles diesel range hydrocarbons stripped of light ends, ensuring continuous transfer to downstream units or storage.

Key Performance Parameters (Typical for OHH1.5x3x13-1)

  • Rated flow: 25 m³/h (typical range: 15 – 35 m³/h)

  • Rated head: 130 m (corresponding differential pressure: 1275 kPa)

  • Speed: 2950 RPM (or 3550 RPM for 60 Hz)

  • Rated power: 15 – 22 kW (depending on specific gravity of diesel)

Process Compatibility (Diesel Stripper Bottom Service)

  • Temperature range: Up to 260°C (500°F) – suitable for high temperature diesel bottoms.

  • Design pressure: Up to 40 bar (580 psi) – compatible with typical stripper bottom operating pressure.

  • Media handled: Diesel, light gas oil, hydrocarbon mixtures with low vapor pressure.

  • Wetted materials: Carbon steel (WCB) with hard facing / 316 stainless steel or duplex (optional for higher corrosion resistance).

Reliability & Efficiency

  • Sealing system: Mechanical seal (single or double cartridge) with API flush plans – typically Plan 21 (cooling) or Plan 23 (high temperature service). Optional Plan 52/53 for double seal arrangements.

  • Hydraulic efficiency: ≥65% at best efficiency point (BEP)

  • NPSHr: ≤5.0 m – ensures stable operation even with potential vapor content.

  • MTBF: ≥8000 hours – supports continuous refinery operation 24/7.

Mechanical Design (OHH1.5x3x13-1)

  • Inlet/Outlet: 1.5″ (40 mm) suction × 3″ (80 mm) discharge – note: OHH1.5x3x13-1 nomenclature indicates suction size 1.5 inch, discharge size 3 inch, impeller nominal diameter 13 inch.

  • Flange rating: Class 300 / Class 600 RF (customizable based on design pressure)

  • Design standard: API 610 11th/12th edition (OHH type – heavy duty, centerline support for high temperature)

  • Material standard: Casing in carbon steel (WCB) or alloy steel (WC6); impeller in CA6NM or 17-4 PH; shaft in AISI 4140 (hardened) or 17-4 PH.

  • Mounting: Horizontal, centerline mounted – back pull‑out design allows maintenance without disturbing piping; cooling fins or water jacket for high temperature applications.

Why Choose This Pump?

For diesel stripper bottoms service in crude distillation units, hydrocrackers, or coker fractionators, the OHH1.5x3x13-1 delivers exceptional reliability and thermal durability. Its API 610 heavy‑duty construction, high temperature capability, and optimized hydraulics make it the preferred choice for refinery bottoms transfer applications.

Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service for your diesel stripper bottom pump requirements.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit