The VGO Fractionator Bottoms Pump BBT 4x6x14-2 is a rugged, API 610 heavy duty centrifugal pump (OHH or BB type) specifically engineered for high temperature vacuum gas oil (VGO) fractionator bottom service in petroleum refineries. It ensures continuous, reliable transfer of heavy VGO bottoms from the fractionator to downstream hydroprocessing units, storage, or further processing.
Key Performance Parameters (Typical for BBT 4x6x14-2)
Rated flow: 250 m³/h (typical range: 200 – 320 m³/h)
Rated head: 125 m (corresponding differential pressure: 1226 kPa)
Speed: 1480 RPM (for 50 Hz) or 1780 RPM (for 60 Hz)
Rated power: 110 – 160 kW (depending on VGO specific gravity, typically 0.85–0.95)
Process Compatibility (VGO Fractionator Bottom Service)
Temperature range: Up to 370°C (700°F) – suitable for high temperature VGO bottoms.
Design pressure: Up to 40 bar (580 psi) – compatible with typical fractionator bottom operating pressure.
Media handled: Vacuum gas oil (VGO), heavy hydrocarbon mixtures, potential trace solids/coke fines.
Wetted materials: Carbon steel (WCB or WC6) with hard facing / 316 stainless steel or duplex (optional for higher corrosion/erosion resistance).
Reliability & Efficiency
Sealing system: Mechanical seal (single or double cartridge) with API flush plans – typically Plan 21 (cooling with orifice) or Plan 23 (high temperature, jacketed). Plan 32 (external flush) optional for dirty service.
Hydraulic efficiency: ≥75% at best efficiency point (BEP)
NPSHr: ≤6.0 m – ensures stable operation under varying suction head conditions.
MTBF: ≥8000 hours – supports continuous refinery operation 24/7 with minimal maintenance.
Mechanical Design (BBT 4x6x14-2)
Inlet/Outlet: 4″ (100 mm) suction × 6″ (150 mm) discharge – note: the 4x6x14-2 nomenclature typically indicates 4″ discharge, 6″ suction, and 14″ nominal impeller diameter (or 2nd stage?). Confirm orientation. For fractionator bottoms, suction is usually larger.
Flange rating: Class 300 / Class 600 RF (customizable based on design pressure and temperature)
Design standard: API 610 11th/12th edition (OHH or BB type – centerline support for high temperature, back pull‑out design)
Material standard: Casing in carbon steel (WCB) or alloy steel (WC6 for high temp); impeller in CA6NM or 17-4 PH with hard coating; shaft in AISI 4140 (hardened) or 17-4 PH.
Mounting: Horizontal, centerline mounted – cooling fins or water jacket provided for high temperature applications. Back pull‑out design allows maintenance without disturbing piping.
Why Choose This Pump?
For VGO fractionator bottoms service in crude vacuum units, coker fractionators, or hydrocracker fractionators, the BBT 4x6x14-2 delivers exceptional thermal durability, high reliability, and efficient hydraulic performance. Its API 610 heavy‑duty construction, high temperature capability, and robust sealing options make it the preferred choice for refinery bottoms transfer applications.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service for your VGO fractionator bottom pump requirements.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.