The Pumparound Pump BBS 6x8x15J is a rugged, API 610 heavy duty centrifugal pump (typically BB or OHH type) specifically engineered for fractionator pumparound reflux service in petroleum refineries and petrochemical plants. It circulates large volumes of high temperature hydrocarbon streams from the fractionator side draw back to the tower, maximizing heat recovery and enhancing fractionation efficiency.
Key Performance Parameters (Typical for BBS 6x8x15J)
Rated flow: 800 m³/h (typical range: 600 – 1000 m³/h)
Rated head: 110 m (corresponding differential pressure: 1079 kPa)
Speed: 1480 RPM (for 50 Hz) or 1780 RPM (for 60 Hz)
Rated power: 250 – 350 kW (depending on media specific gravity, typically 0.7–0.9)
Process Compatibility (Fractionator Pumparound Service)
Temperature range: Up to 300°C (572°F) – suitable for high temperature pumparound streams (e.g., diesel, heavy naphtha, or light gas oil).
Design pressure: Up to 25 bar (363 psi) – compatible with typical fractionator side draw pressure.
Media handled: Hydrocarbon mixtures (diesel, heavy naphtha, kerosene, light gas oil), potentially with trace H₂S or other corrosives.
Wetted materials: Carbon steel (WCB) / 316 stainless steel or duplex (optional for higher corrosion resistance).
Reliability & Efficiency
Sealing system: Mechanical seal (single or double cartridge) with API flush plans – typically Plan 21 (cooling with orifice) or Plan 23 (high temperature, jacketed). Optional Plan 52/53 for double seal arrangements.
Hydraulic efficiency: ≥82% at best efficiency point (BEP)
NPSHr: ≤7.5 m – ensures stable operation under varying suction conditions.
MTBF: ≥8000 hours – supports continuous refinery operation 24/7 with minimal maintenance.
Mechanical Design (BBS 6x8x15J)
Inlet/Outlet: 6″ (150 mm) suction × 8″ (200 mm) discharge – note: the 6x8x15J nomenclature typically indicates 6″ discharge, 8″ suction, and 15″ nominal impeller diameter. Confirm orientation; pumparound pumps usually have larger suction.
Flange rating: Class 300 / Class 600 RF (customizable based on design pressure and temperature)
Design standard: API 610 11th/12th edition (BB or OHH type – centerline support for high temperature, back pull‑out design)
Material standard: Casing in carbon steel (WCB) or alloy steel (WC6); impeller in CA6NM or 17-4 PH; shaft in AISI 4140 (hardened) or 17-4 PH.
Mounting: Horizontal, centerline mounted – cooling fins or water jacket provided for high temperature applications. Back pull‑out design allows maintenance without disturbing piping.
Why Choose This Pump?
For fractionator pumparound service in crude distillation units, hydrocrackers, or FCC main fractionators, the BBS 6x8x15J delivers exceptional reliability, high hydraulic efficiency, and robust thermal durability. Its API 610 heavy‑duty construction, optimized hydraulics for high flow, and flexible sealing options make it the industry‑preferred solution for pumparound circulation.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service for your pumparound pump requirements.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.