The Kerosene Product Pump ZF40-3400 is a robust, ISO 2858 / ISO 5199 horizontal centrifugal pump specifically engineered for kerosene product transfer service in petroleum refineries and petrochemical plants. It reliably delivers kerosene from the fractionator side draw or rundown line to storage tanks, hydrotreating units, or blending facilities.
Key Performance Parameters (Typical for ZF40-3400)
Rated flow: 50 m³/h (typical range: 40 – 70 m³/h)
Rated head: 80 m (corresponding differential pressure: 785 kPa)
Speed: 2950 RPM (for 50 Hz) or 3550 RPM (for 60 Hz)
Rated power: 15 – 22 kW (depending on kerosene specific gravity, typically 0.78–0.82)
Process Compatibility (Kerosene Product Service)
Temperature range: -10°C to 150°C (14°F to 302°F) – suitable for ambient to moderately hot kerosene.
Design pressure: Up to 16 bar (232 psi) – compatible with typical product rundown and transfer line pressures.
Media handled: Kerosene, jet fuel (Jet A/A1), light gas oil, diesel, and other middle distillates.
Wetted materials: Carbon steel (standard), 316 stainless steel or duplex (optional for higher corrosion resistance or low sulfur service).
Reliability & Efficiency
Sealing system: Mechanical seal (single cartridge) with API flush plans – typically Plan 11 (internal recirculation) or Plan 21 (cooling) for higher temperatures. Optional Plan 52/53 for double seal arrangements.
Hydraulic efficiency: ≥78% at best efficiency point (BEP)
NPSHr: ≤4.5 m – ensures stable operation under typical suction conditions.
MTBF: ≥8000 hours – supports continuous operation with minimal maintenance.
Mechanical Design (ZF40-3400)
Inlet/Outlet: DN 65 (2.5″) suction × DN 40 (1.5″) discharge (typical for ZF40 frame size). The “3400” typically indicates nominal impeller diameter in mm (approx. 340 mm).
Flange rating: PN 16 / Class 150 RF (customizable)
Design standard: ISO 2858 / ISO 5199 (back pull‑out design, foot mounted)
Material standard: Casing in cast iron (GG25) or cast steel (GS-C25); impeller in bronze (G-CuSn10) or stainless steel (CF8M); shaft in AISI 420 or 431 stainless steel.
Mounting: Horizontal, foot mounted – back pull‑out design allows maintenance without disturbing suction/discharge piping.
Why Choose This Pump?
For kerosene product transfer, jet fuel shipping, or middle distillate rundown in refineries and tank farms, the ZF40-3400 delivers reliable, energy‑efficient performance. Its ISO 2858 standard construction, high hydraulic efficiency, and flexible material options make it a cost‑effective solution for clean hydrocarbon services.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service for your kerosene product pump requirements.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.