Cooling Liquid Pump OHH 4x6x11.5

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The Cooling Liquid Pump OHH 4x6x11.5 is an API 610 OHH type horizontal centrifugal pump designed for cooling liquid circulation in refineries and petrochemical plants. Rated flow 350 m³/h, rated head 80 m, temperature range up to 120°C, design pressure up to 25 bar. Wetted parts in carbon steel or 316 SS. Mechanical seal with API flush plans. Hydraulic efficiency ≥80%, MTBF ≥8000 hours. It reliably circulates cooling water or hydrocarbon cooling media to heat exchangers and process coolers.

Conatct For Details
DetailReview(0)Additional

The Cooling Liquid Pump OHH 4x6x11.5 is a rugged, API 610 OHH type horizontal centrifugal pump specifically engineered for cooling liquid circulation service in petroleum refineries, petrochemical plants, and industrial process facilities. It reliably delivers cooling media – such as cooling water, quench water, or light hydrocarbon coolants – to heat exchangers, process coolers, and reactor quench systems.

Key Performance Parameters (Typical for OHH 4x6x11.5)

  • Rated flow: 350 m³/h (typical range: 280 – 420 m³/h)

  • Rated head: 80 m (corresponding differential pressure: 785 kPa)

  • Speed: 1480 RPM (for 50 Hz) or 1780 RPM (for 60 Hz)

  • Rated power: 90 – 132 kW (depending on media specific gravity, typically 0.8–1.0)

Process Compatibility (Cooling Liquid Service)

  • Temperature range: Up to 120°C (248°F) – suitable for warm cooling water or quench liquid applications.

  • Design pressure: Up to 25 bar (363 psi) – compatible with typical cooling loop pressures.

  • Media handled: Cooling water, quench water, glycol/water mixtures, light hydrocarbon coolants (e.g., light coker gas oil cooler service).

  • Wetted materials: Carbon steel (WCB) – standard; 316 stainless steel or duplex (optional for corrosive or chloride‑containing cooling water).

Reliability & Efficiency

  • Sealing system: Mechanical seal (single or double cartridge) with API flush plans – typically Plan 11 (internal recirculation) or Plan 21 (cooling). Optional Plan 52/53 for double seal arrangements when handling hydrocarbon coolants.

  • Hydraulic efficiency: ≥80% at best efficiency point (BEP)

  • NPSHr: ≤5.5 m – ensures stable operation under typical suction conditions.

  • MTBF: ≥8000 hours – supports continuous 24/7 operation with minimal maintenance.

Mechanical Design (OHH 4x6x11.5)

  • Inlet/Outlet: 4″ (100 mm) suction × 6″ (150 mm) discharge – note: the 4x6x11.5 nomenclature typically indicates 4″ discharge, 6″ suction, and 11.5″ nominal impeller diameter. For cooling liquid pumps, suction is usually larger to minimize NPSHr.

  • Flange rating: Class 150 / Class 300 RF (customizable based on design pressure)

  • Design standard: API 610 11th/12th edition (OHH type – heavy duty, centerline support)

  • Material standard: Casing in carbon steel (WCB); impeller in CA6NM or 316 SS; shaft in AISI 4140 (hardened) or 17-4 PH.

  • Mounting: Horizontal, centerline mounted – back pull‑out design allows maintenance without disturbing piping.

Why Choose This Pump?

For cooling liquid circulation in refinery process coolers, quench systems, or utility cooling loops, the OHH 4x6x11.5 delivers reliable, high‑efficiency performance. Its API 610 heavy‑duty construction, optimized hydraulics, and versatile sealing options make it an ideal choice for demanding cooling applications.

Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service for your cooling liquid pump requirements.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit