The Flare K.O. Drum Condensate Pump OHH 1.5x4x14B is a rugged, API 610 OHH type horizontal centrifugal pump specifically engineered for flare knockout drum condensate recovery service in refineries, petrochemical plants, and oil & gas facilities. It reliably pumps hydrocarbon condensate collected in the flare knock‑out drum to slop oil tanks, oily water treatment, or downstream processing.
Key Performance Parameters (Typical for OHH 1.5x4x14B)
Rated flow: 15 m³/h (typical range: 10 – 22 m³/h)
Rated head: 120 m (corresponding differential pressure: 1177 kPa)
Speed: 2950 RPM (50 Hz) or 3550 RPM (60 Hz)
Rated power: 7.5 – 11 kW (depending on condensate specific gravity, typically 0.75–0.85)
Process Compatibility (Flare KO Drum Condensate Service)
Temperature range: -10°C to 150°C (14°F to 302°F) – suitable for ambient to moderately hot condensate.
Design pressure: Up to 20 bar (290 psi) – compatible with typical KO drum pressure (near atmospheric to low pressure).
Media handled: Hydrocarbon condensate (light hydrocarbons, water, potential H₂S), slop oil, oily water.
Wetted materials: Carbon steel (WCB) – standard; 316 stainless steel or duplex (optional for sour service or higher corrosion resistance).
Reliability & Efficiency
Sealing system: Mechanical seal (single or double cartridge) with API flush plans – typically Plan 11 (internal recirculation) or Plan 21 (cooling). For sour/hazardous service, Plan 52/53 (double seal with barrier fluid) is recommended.
Hydraulic efficiency: ≥60% at best efficiency point (BEP) – optimized for low flow, high head.
NPSHr: ≤3.5 m – ensures stable operation even with potential vapor entrainment.
MTBF: ≥8000 hours – supports reliable continuous or intermittent operation.
Mechanical Design (OHH 1.5x4x14B)
Inlet/Outlet: 1.5″ (40 mm) discharge × 4″ (100 mm) suction – the OHH 1.5x4x14B nomenclature indicates 1.5″ discharge, 4″ suction, and 14″ nominal impeller diameter (B variant design). Suction is larger to minimize NPSHr.
Flange rating: Class 150 / Class 300 RF (customizable)
Design standard: API 610 11th/12th edition (OHH type – heavy duty, centerline support)
Material standard: Casing in carbon steel (WCB); impeller in CA6NM or 316 SS; shaft in AISI 4140 (hardened) or 17-4 PH.
Mounting: Horizontal, centerline mounted – back pull‑out design allows maintenance without disturbing piping.
Why Choose This Pump?
For flare knockout drum condensate recovery in refinery flare systems, the OHH 1.5x4x14B delivers reliable, low‑flow high‑head performance. Its API 610 heavy‑duty construction, robust sealing options for sour service, and compact design make it the preferred choice for handling hydrocarbon condensate from flare systems.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service for your flare KO drum condensate pump requirements.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.