Our API 610 DMDS chemical injection pumps are heavy‑duty centrifugal pumps engineered specifically for the precise, high‑pressure injection of dimethyl disulfide (DMDS) into refinery hydrotreating and hydrocracking reactors for catalyst sulfiding and activation. DMDS (C₂H₆S₂) is a highly flammable, toxic, and corrosive liquid with a flash point of 15‑24°C and a vapor pressure of 22‑28.6 mmHg at 20‑25°C. Its vapor can form explosive mixtures with air and is heavier than air, allowing it to spread along the ground. DMDS is widely used in refineries as a sulfiding agent for catalyst activation and for maintaining catalyst sulfur levels during ongoing operations. It contains approximately 68% sulfur and decomposes in the presence of heat and hydrogen to form hydrogen sulfide (H₂S), which converts metal oxide catalysts into active metal sulfides.
This is a demanding low‑flow, high‑head pumping application, requiring pumps with exceptional pressure containment, precise flow control, corrosion resistance to handle sulfur compounds, and reliable performance under continuous operation. DMDS is also immiscible with water and can react vigorously with oxidizing agents, strong bases, and acids, demanding strict material compatibility and leak‑tight sealing.
API 610 Classifications for DMDS Chemical Injection Duties
BB5 Barrel‑Type Pumps (Preferred for Extreme High‑Pressure Injection)
For main high‑pressure DMDS injection into refinery hydrotreater and hydrocracker feed streams, the BB5 subtype (barrel‑type, double‑casing, multistage) is the preferred configuration for pressures exceeding 100 barg. The inner casing contains multistage impellers, while the heavy‑walled outer barrel provides absolute pressure containment – a critical safety feature for toxic, flammable chemical service. BB5 pumps deliver heads up to 3,500 metres and flows typically ranging from 10 to 200 m³/h. The double‑casing design, centreline mounting, and radial split construction enable rapid warm‑up and accommodate thermal expansion.
BB – Between Bearings Pumps
For medium‑pressure DMDS injection and booster duties, BB pumps provide superior rotor stability and long‑term reliability. BB3 (axially split, multistage) and BB4 (ring section) configurations are specified for flows up to 500 m³/h and heads up to 2,000 metres.
OH – Overhung Pumps (Preferred for Low‑Flow, High‑Head Services)
For low‑flow, high‑head DMDS injection applications – a characteristic of many chemical injection duties – OH pumps are often the optimal choice. OH6 (integrally geared, high‑speed) and OH2 (horizontal, centreline‑mounted) subtypes offer compact, space‑saving solutions with:
Between‑bearings arrangement minimizing shaft deflection
No wear rings or close running clearances
Low NPSH3 without an inducer
Pulsation‑free flow over the entire head‑flow curve
API 682 cartridge seals
VS – Vertically Suspended Pumps
VS pumps are used for low‑NPSH suction from DMDS storage tanks or sumps. VS1 (vertical turbine) and VS6 (vertical can/barrel) types submerge the impeller below the liquid level, eliminating cavitation and priming problems.
Key Performance & Design Features
Pressure Capability – Discharge pressures from 50 barg up to 450 barg, matching hydrotreater feed pressures
Flow & Head – Capacities from 1 m³/h to 500 m³/h; multistage hydraulics generate heads up to 3,500 metres; OH6 designs achieve heads up to 1,500 metres at flows below 100 m³/h
Temperature Range – Engineered for DMDS from ambient to 150°C, with appropriate material selection
Low‑Flow Capability – Specialised hydraulic designs (Pitot tube, high‑speed, and multistage configurations) for efficient low‑flow, high‑head operation
Materials – Wetted parts in stainless steels (316L, duplex, super duplex), 12% chromium steels, and corrosion‑resistant alloys to withstand sulfur compounds and DMDS corrosion. Full NACE MR0175/ISO 15156 compliance for sour service
Sealing – API 682 dual mechanical seals with Plan 53A/B/C or Plan 72/75/76 seal support systems for high‑pressure, toxic, and volatile chemical injection service
Casing Integrity – BB5 barrel casing designed to ASME Section VIII; hydrostatically tested at 1.5x maximum working pressure
Rotor Dynamics – Rigorous API 684 analysis ensures lateral and torsional critical speeds are well above the operating range
Bearing & Lubrication – Forced oil or oil mist lubrication with bearing temperature and vibration monitoring for predictive maintenance
NPSH Performance – Low NPSH3 designs available without inducers for demanding suction conditions
Safety Features – Anti‑static design, grounding connections, and explosion‑proof construction to handle flammable DMDS safely
Typical Applications
DMDS injection for catalyst presulfiding in hydrotreating and hydrocracking units
Sulfiding agent injection to maintain catalyst activity during low‑sulfur feedstock processing
Chemical injection for catalyst activation in refinery hydroprocessing units
Low‑flow, high‑head chemical injection in refinery and petrochemical processes
DMDS transfer and injection systems
Industries Served
Oil refineries (hydrotreating, hydrocracking, catalytic reforming)
Petrochemicals (catalyst activation and sulfiding)
Gas processing (condensate hydrotreating)
Why Choose Our DMDS Chemical Injection Pumps?
With specialised expertise in high‑pressure chemical injection and full API 610 compliance, we design and manufacture DMDS chemical injection pumps that deliver best‑in‑class reliability, safety, and precision. Every pump undergoes rigorous hydrostatic testing at 1.5x maximum working pressure, performance curve verification, mechanical running tests, and comprehensive NDT inspections (radiographic, ultrasonic, magnetic particle, dye penetrant) with full documentation to meet the most stringent owner‑operator specifications. We provide full engineering support – including API 684 rotor dynamics analysis, NPSH margin calculations, DMDS material compatibility evaluation, and seal system design – to ensure seamless integration into your refinery hydroprocessing unit. All materials are supplied with complete traceability and certified test reports. Our pumps are designed with safety features to handle DMDS's unique hazards: flammability, toxicity, vapor explosion risk, and corrosivity.
Contact Us
For technical datasheets, API 684 analysis reports, or a project‑specific quotation, please contact us at:
info@hyrig.com
Partner with us to activate your refinery catalysts with reliable, code‑compliant API 610 DMDS chemical injection pump technology.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.