MEA Injection Pumps – API 610 BB5, BB, OH & VS

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Our API 610 MEA injection pumps are available in BB5 barrel, BB, OH, and VS designs, specifically engineered for precise high‑pressure injection of monoethanolamine (MEA) into gas sweetening units, refinery treating systems, and petrochemical processes. MEA is a highly corrosive amine used for acid gas removal (H₂S, CO₂). BB5 barrel‑type multistage pumps are the preferred choice for extreme high‑pressure injection duties, delivering pressures up to 400 barg. BB and OH configurations serve low‑flow, high‑head applications, while VS pumps handle low‑NPSH suction. Built with stainless steel, duplex, and corrosion‑resistant alloys. Fully API 610/ISO 13709 and NACE MR0175 compliant for reliable, safe MEA injection service.

Conatct For Details
DetailReview(0)Additional

Our API 610 MEA injection pumps are heavy‑duty centrifugal pumps engineered specifically for the precise, high‑pressure injection of monoethanolamine (MEA) into gas sweetening units, refinery treating systems, and petrochemical processes. MEA (C₂H₇NO) is a primary amine widely used in natural gas processing, refinery gas treating, and Claus sulfur recovery units to remove acid gases (H₂S, CO₂) from hydrocarbon streams. It is characterized by high alkalinity, corrosivity, and the tendency to form heat‑stable salts and degradation products that demand pumps with exceptional corrosion resistance, robust sealing, and reliable performance.

This is a demanding low‑flow, high‑head pumping application, requiring pumps with precise flow control, corrosion resistance to handle amine solutions, and reliable performance under continuous or intermittent injection conditions. MEA is also toxic, corrosive, and requires strict environmental compliance for fugitive emission control. Manufactured in strict compliance with the latest edition of API 610 (ISO 13709), these pumps are designed for maximum safety, reliability, and longevity.

API 610 Classifications for MEA Injection Duties

  • BB5 Barrel‑Type Pumps (Preferred for Extreme High‑Pressure Injection)
    For main high‑pressure MEA injection into gas sweetening or hydrotreating units, the BB5 subtype (barrel‑type, double‑casing, multistage) is the preferred configuration for pressures exceeding 100 barg. The inner casing contains multistage impellers, while the heavy‑walled outer barrel provides absolute pressure containment – a critical safety feature for corrosive amine service. BB5 pumps deliver heads up to 3,500 metres and flows typically ranging from 10 to 200 m³/h. The double‑casing design and centreline mounting enable rapid warm‑up and accommodate thermal expansion.

  • BB – Between Bearings Pumps
    For medium‑pressure MEA injection and booster duties, BB pumps provide superior rotor stability and long‑term reliability. BB3 (axially split, multistage) and BB4 (ring section) configurations are specified for flows up to 500 m³/h and heads up to 2,000 metres.

  • OH – Overhung Pumps (Preferred for Low‑Flow, High‑Head Services)
    For low‑flow, high‑head MEA injection applications – a characteristic of many chemical injection duties – OH pumps are often the optimal choice. OH6 (integrally geared, high‑speed) and OH2 (horizontal, centreline‑mounted) subtypes offer compact, space‑saving solutions with:

    • Between‑bearings arrangement minimizing shaft deflection

    • No wear rings or close running clearances

    • Low NPSH3 without an inducer

    • Pulsation‑free flow over the entire head‑flow curve

    • API 682 cartridge seals

  • VS – Vertically Suspended Pumps
    VS pumps are used for low‑NPSH suction from MEA storage tanks or sumps. VS1 (vertical turbine) and VS6 (vertical can/barrel) types submerge the impeller below the liquid level, eliminating cavitation and priming problems.

Key Performance & Design Features

  • Pressure Capability – Discharge pressures from 20 barg up to 450 barg, matching gas treating and hydrotreating feed pressures

  • Flow & Head – Capacities from 1 m³/h to 500 m³/h; multistage hydraulics generate heads up to 3,500 metres; OH6 designs achieve heads up to 1,500 metres at flows below 100 m³/h

  • Temperature Range – Engineered for MEA from ambient to 150°C (302°F), with appropriate material selection

  • Low‑Flow Capability – Specialised hydraulic designs for efficient low‑flow, high‑head operation

  • Materials – Wetted parts in stainless steels (316L, duplex, super duplex), 12% chromium steels, and corrosion‑resistant alloys to withstand MEA corrosion, stress corrosion cracking, and heat‑stable salt attack. Full NACE MR0175/ISO 15156 compliance for sour service

  • Sealing – API 682 dual mechanical seals with Plan 53A/B/C or Plan 72/75/76 seal support systems for high‑pressure, corrosive, and toxic amine service

  • Casing Integrity – BB5 barrel casing designed to ASME Section VIII; hydrostatically tested at 1.5x maximum working pressure

  • Rotor Dynamics – Rigorous API 684 analysis ensures lateral and torsional critical speeds are well above the operating range

  • Bearing & Lubrication – Forced oil or oil mist lubrication with bearing temperature and vibration monitoring for predictive maintenance

  • NPSH Performance – Low NPSH3 designs available without inducers for demanding suction conditions

  • Corrosion Protection – Special material selection to resist amine corrosion, stress cracking, and degradation product attack

Typical Applications

  • MEA injection for gas sweetening (acid gas removal) in natural gas processing

  • MEA injection into refinery fuel gas and LPG treating units

  • Amine injection for CO₂ and H₂S removal in petrochemical plants

  • Chemical injection for catalyst activation and regeneration

  • Low‑flow, high‑head chemical injection in refinery and petrochemical processes

Industries Served

  • Natural gas processing (amine sweetening)

  • Oil refineries (gas treating, LPG treating)

  • Petrochemicals (CO₂ and H₂S removal)

  • Fertiliser and ammonia plants

  • Sulfur recovery units (Claus process tail gas treating)

Why Choose Our MEA Injection Pumps?

With specialised expertise in corrosive amine handling and full API 610 compliance, we design and manufacture MEA injection pumps that deliver best‑in‑class reliability, safety, and precision. Every pump undergoes rigorous hydrostatic testing at 1.5x maximum working pressure, performance curve verification, mechanical running tests, and comprehensive NDT inspections (radiographic, ultrasonic, magnetic particle, dye penetrant) with full documentation to meet the most stringent owner‑operator specifications. We provide full engineering support – including API 684 rotor dynamics analysis, NPSH margin calculations, MEA material compatibility evaluation, and seal system design – to ensure seamless integration into your gas treating or refinery unit. All materials are supplied with complete traceability and certified test reports.

Contact Us

For technical datasheets, API 684 analysis reports, or a project‑specific quotation, please contact us at:

info@hyrig.com

Partner with us to deliver reliable, safe MEA injection for your gas sweetening and treating processes with code‑compliant API 610 pump technology.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit