Defoamer Injection Pumps – API 610 BB, OH & VS

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Our API 610 defoamer injection pumps are available in BB, OH, and VS designs, specifically engineered for precise high‑pressure injection of defoamer and antifoam chemicals into refinery processes, gas treating units, amine systems, and petrochemical operations. Defoamers are essential for controlling foam in gas sweetening, amine treating, and various separation processes, preventing carryover and maintaining process efficiency. BB pumps deliver superior rotor stability for demanding injection duties. OH pumps provide compact solutions for lower‑pressure or booster injection services, while VS pumps handle low‑NPSH suction from chemical storage tanks. Built with stainless steel, duplex, and corrosion‑resistant alloys. Fully API 610/ISO 13709 and NACE MR0175 compliant for reliable, safe defoamer injection.

Conatct For Details
DetailReview(0)Additional

Our API 610 defoamer injection pumps are heavy‑duty centrifugal pumps engineered specifically for the precise, high‑pressure injection of defoamer and antifoam chemicals into refinery processes, gas treating units, amine systems, and petrochemical operations. Defoamers – also known as antifoaming agents or foam inhibitors – are critical chemicals used to control and prevent foam formation in various industrial processes, including amine gas sweetening, sour water stripping, crude oil separation, and wastewater treatment. Foam can cause severe operational issues such as carryover, reduced separation efficiency, flooding of towers, and instrument fouling, making precise and reliable defoamer injection essential for maintaining process stability and productivity.

Defoamer chemicals are typically injected at high pressures (up to 100‑200 barg or higher) and low to moderate flow rates, requiring pumps with exceptional pressure containment, precise flow control, corrosion resistance to handle chemical formulations, and reliable performance under continuous or intermittent injection conditions. Manufactured in strict compliance with the latest edition of API 610 (ISO 13709), these pumps are designed for maximum safety, reliability, and longevity in the most demanding chemical injection applications. The API 610 standard provides three primary configurations – OH (Overhung), BB (Between Bearings), and VS (Vertically Suspended) – with the BB type often preferred for high‑pressure, high‑reliability injection duties.

API 610 Classifications for Defoamer Injection Duties

  • BB – Between Bearings Pumps
    For high‑pressure defoamer injection (up to 200 barg or more) into main process streams, BB pumps provide superior rotor rigidity and smooth, pulse‑free flow. BB2 (radially split, single‑stage or two‑stage) and BB3/BB4 (multistage) configurations are commonly specified for capacities from 5 to 200 m³/h and heads up to 500 metres. The between‑bearings arrangement minimises shaft deflection, extending mechanical seal and bearing life – critical when handling corrosive chemicals. Radially split casings offer excellent pressure containment and easy maintenance.

  • OH – Overhung Pumps
    For moderate‑capacity defoamer injection, booster duties, or lower‑pressure chemical dosing applications, OH pumps offer a compact and cost‑effective solution. The OH2 (horizontal, centreline‑mounted) and OH3 (vertical inline) subtypes are widely used for chemical injection points, skid‑mounted dosing systems, and auxiliary services. Centreline mounting accommodates thermal expansion. Their back‑pull‑out design allows easy seal and impeller maintenance without disturbing piping.

  • VS – Vertically Suspended Pumps
    In applications where defoamer is stored in underground tanks or sumps with low NPSH, VS pumps provide excellent suction performance. VS1 (vertical turbine) and VS6 (vertical can/barrel) types submerge the impeller below the liquid level, eliminating cavitation and priming problems. Their vertical footprint saves valuable plot space.

Key Performance & Design Features

  • Pressure Capability – Designed for injection pressures from 10 barg up to 350 barg, matching refinery, gas treating, and petrochemical operating conditions.

  • Flow Range – Capacities from 0.5 m³/h to 200 m³/h for accurate chemical metering and continuous injection.

  • Temperature Range – Engineered for defoamer chemicals from ambient to 150°C (302°F), with appropriate thermal expansion allowances.

  • Corrosion Resistance – Wetted parts in stainless steels (316L, duplex, super duplex), high‑alloy materials (Alloy 20, Hastelloy C‑276), and corrosion‑resistant coatings to resist defoamer formulations and carrier solvents. NACE MR0175/ISO 15156 compliance available for sour service.

  • Sealing – API 682 mechanical seals – dual (tandem or pressurised) seals are recommended to prevent leakage of hazardous chemicals. Flush plans (Plan 11, 13, 32, 53A/B, 62) with cooling/quench ensure seal face integrity.

  • Casing – Heavy‑walled, radially or axially split casings with replaceable wear rings; smooth internal surfaces reduce fouling.

  • Bearings – Heavy‑duty bearings (oil or grease) with temperature/vibration monitoring for predictive maintenance.

  • Impellers – Closed impellers for efficient high‑pressure service; optional hardened wear rings for abrasive formulations.

  • Material Traceability – All wetted materials are fully traceable with certified mill test reports (MTRs).

Typical Applications

  • Defoamer injection into amine gas sweetening units (foam control)

  • Antifoam chemical dosing in sour water strippers

  • Defoamer injection into crude oil separation and dehydration systems

  • Chemical injection for foam suppression in gas processing plants

  • Defoamer dosing in wastewater treatment and effluent systems

  • Injection into cooling water and boiler systems for foam control

  • Antifoam injection in petrochemical and refinery fractionation processes

Industries Served

  • Oil refineries (amine treating, sour water stripping, crude processing)

  • Natural gas processing (gas sweetening, dehydration)

  • Petrochemicals (fractionation, separation processes)

  • Chemical processing (foam control systems)

  • Oil and gas production (separation and dehydration)

  • Wastewater treatment facilities

Why Choose Our Defoamer Injection Pumps?

With extensive experience in corrosive chemical handling and full API 610 compliance, we design and manufacture defoamer injection pumps that deliver exceptional safety, accuracy, and reliability. Every pump undergoes rigorous hydrostatic testing, performance curve verification, and comprehensive NDT inspections (radiographic, ultrasonic, dye penetrant) with complete documentation to meet international project specifications. We offer customised material grades, seal systems, and hydraulic designs tailored to your specific defoamer formulation, injection pressure, and flow requirements. Our engineering support includes NPSH analysis, API 684 rotor dynamics, material compatibility evaluation, and emissions control advisory to ensure long‑term, trouble‑free operation.

Contact Us

For technical datasheets, application engineering advice, or a project‑specific quotation, please contact us at:

info@hyrig.com

Rely on our API 610 defoamer injection pumps to deliver accurate, safe, and reliable chemical dosing for your critical foam control programmes.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit