Our API 610 sealant removal pumps are heavy‑duty centrifugal pumps engineered specifically for high‑pressure water flushing to remove sealants, deposits, process residues, and fouling materials from equipment, pipelines, heat exchangers, and process systems in refineries, petrochemical plants, chemical facilities, and industrial operations. Sealant removal is a critical maintenance operation where high‑pressure water is used to dissolve, dislodge, and flush away accumulated sealants, polymerized materials, coke deposits, and other contaminants that can reduce process efficiency and equipment performance.
The flushing water is typically clean process water or demineralized water, injected at high pressures to achieve effective cleaning action. Pumps for this service demand robust construction, reliable performance under intermittent or continuous operation, and corrosion resistance to handle water and potential chemical residues. Manufactured in strict compliance with the latest edition of API 610 (ISO 13709), these pumps are designed for safe, reliable, and efficient operation in the most demanding industrial maintenance applications. The API 610 standard provides three primary configurations – OH (Overhung), BB (Between Bearings), and VS (Vertically Suspended) – with selection based on flow rate, head, NPSH availability, and installation requirements.
API 610 Classifications for Sealant Removal Duties
BB – Between Bearings Pumps
For main high‑capacity water flushing and sealant removal operations, BB pumps provide superior rotor stability and long‑term reliability. BB1 (axially split, double‑suction) and BB2 (radially split, single‑stage or two‑stage) configurations are commonly specified for flows from 50 to 2,500 m³/h and heads up to 300 metres. The between‑bearings arrangement minimises shaft deflection, extending seal and bearing life – critical for continuous flushing operations. Double‑suction designs (BB1) balance axial thrust at high flows.
OH – Overhung Pumps
For moderate‑capacity sealant removal, booster duties, or smaller flushing applications, OH pumps offer a compact and cost‑effective solution. The OH2 (horizontal, centreline‑mounted) and OH3 (vertical inline) subtypes are widely used for sealant removal in smaller equipment, auxiliary flushing, and maintenance operations. Centreline mounting accommodates thermal expansion. Their back‑pull‑out design allows easy seal and impeller maintenance without disturbing piping. Single‑stage OH pumps handle flows up to 1,200 m³/h and heads up to 200 metres.
VS – Vertically Suspended Pumps
In applications where flushing water is drawn from underground storage tanks, sumps, or low‑NPSH collection vessels, VS pumps provide excellent suction performance. VS1 (vertical turbine) and VS6 (vertical can/barrel) types submerge the impeller below the liquid level, eliminating cavitation and priming problems. Their vertical footprint saves valuable plot space.
Key Performance & Design Features
Flow Range – Capacities from 10 m³/h to 3,000 m³/h, covering all sealant removal requirements.
Head Range – Up to 350 metres for high‑pressure flushing duties.
Temperature Range – Designed for water from ambient to 80°C (176°F), with appropriate material selection.
Pressure Rating – Discharge pressures up to 50 barg, matching flushing system requirements.
Materials – Wetted parts in stainless steels (304L, 316L, duplex), and corrosion‑resistant alloys to withstand water and potential chemical residues. Full NACE MR0175/ISO 15156 compliance available for sour service.
Sealing – API 682 mechanical seals – single or dual (tandem) seals depending on service requirements. Suitable flush plans (Plan 11, 13, 32) with cooling to maintain seal integrity.
Casing Design – Robust casings with replaceable wear rings and impeller shrouds; smooth internal surfaces to minimise fouling and scale deposition.
Bearing & Lubrication – Heavy‑duty bearings (oil or grease lubricated) with temperature and vibration monitoring for predictive maintenance.
Impeller Options – Closed impellers for efficient handling; open or semi‑open designs for streams with potential solids or debris from flushing operations.
Typical Applications
High‑pressure water flushing for sealant removal from process equipment
Pipeline cleaning and maintenance flushing
Heat exchanger tube cleaning and deposit removal
Sealant and polymer removal from reactors and vessels
Maintenance flushing for process systems during turnarounds
Chemical residue and deposit removal in refineries and petrochemical plants
Industries Served
Oil refineries (equipment maintenance, turnaround flushing)
Petrochemicals (reactor and vessel cleaning)
Chemical processing (deposit removal)
Industrial cleaning and maintenance services
Power generation (heat exchanger cleaning)
Why Choose Our Sealant Removal Pumps?
With extensive experience in high‑pressure water handling and full API 610 compliance, we design and manufacture sealant removal pumps that deliver reliable, efficient, and durable performance. Every pump undergoes rigorous hydrostatic testing, performance curve verification, and comprehensive NDT inspections (radiographic, ultrasonic, dye penetrant) with complete documentation to meet international project specifications. We offer customised material selections, impeller designs, and seal systems tailored to your specific flushing water quality, pressure requirements, and operating conditions. Our engineering support includes NPSH analysis, API 684 rotor dynamics, and system integration advice to ensure long‑term, trouble‑free operation.
Contact Us
For technical datasheets, application engineering advice, or a project‑specific quotation, please contact us at:
info@hyrig.com
Rely on our API 610 sealant removal pumps to deliver reliable, high‑pressure water flushing for your critical maintenance and cleaning operations.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.