| Model | Nominal Size | Max Flow (L/min) | Max Pressure | Max Pressure Protection |
|---|---|---|---|---|
| DRE10/20/30 | DN10 to DN32 | Up to 300 | 31.5 MPa | No |
| DREM10/20/30 | DN10 to DN32 | Up to 300 | 31.5 MPa | Yes |
| 3DREP6 Valve | DN6 | 15 | 10 MPa | No |
Data source: Technical data table.
Mounting parameters for the DRE/DREM series (Subplate Type):
| Parameter | Specification |
|---|---|
| Mounting Interface | ISO 4401-05 to 08 (varies by size) |
| Port Connections | A, B, X, Y (O-ring sizes vary) |
| Weight | Approx. 2.6 kg to 8.4 kg (varies by size) |
The DRE valve uses a proportional solenoid to control a pilot poppet. The secondary pressure (port A) acts on the main spool and the pilot poppet. When the secondary pressure exceeds the solenoid setting, the pilot poppet opens, causing the main spool to throttle the flow and maintain the set pressure. The DREM version adds a mechanical maximum pressure protection valve for safety.
`DRE` or `DREM` + `Size (10/20/30)` + `Control Type (No mark/Y)` + `30` + `Pressure Range`.
Example: `DREM20-30/315Y` = DN20, with max pressure protection, 31.5 MPa, external pilot drain.
Replacing an old valve? Check:
Used in large injection molding machines, hydraulic presses, and heavy machinery for programmable pressure reduction.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help choosing between DRE and DREM, or configuring the pilot oil? Contact our engineers with your system schematic.
Q: What is the difference between DRE and DREM?
A: The DREM includes a mechanical maximum pressure protection valve to prevent system damage in case of electrical failure.
Q: What is the maximum flow rate for the DN32 size?
A: The DN32 size supports a maximum flow rate of up to 300 L/min.
Q: Does the DRE valve require external pilot oil?
A: The DRE valve typically uses internal pilot oil, but an external drain (Y port) is recommended to ensure stable operation.
For DRE/DREM proportional reducing valve selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.