The Drillmec 14T2200 is a 2,200 HP triplex single-acting piston pump with a 14-inch (355.6 mm) stroke and a gear ratio of 3.639. It is designed for ultra-deep well and extreme high-pressure drilling operations. The maximum rated input is 2,200 HP at 110 SPM, with a hydraulic power output of 1,970 HP. The pump accommodates liner sizes from 5.0 inch to 9.0 inch (127.0 mm to 228.6 mm) and delivers a maximum discharge pressure of 7,500 PSI (517 bar) with a maximum flow rate of 1,272 GPM (4,816 L/min) at 110 SPM. The 14T2200 is widely used in land and offshore rigs, high-pressure operations, and well service applications.
Performance Data (14T2200 Triplex Mud Pump):
| Liner Size (inch) | 9.0 | 8.0 | 7.50 | 7.0 | 6.50 | 6.0 | 5.50 | 5.0 |
|---|---|---|---|---|---|---|---|---|
| Liner Size (mm) | 228.6 | 203.2 | 190.5 | 177.8 | 165.1 | 152.4 | 139.7 | 127.0 |
| Max Discharge Pressure (psi) | 2654 | 3364 | 3828 | 4409 | 5105 | 5990 | 7135 | 7500 |
| Max Discharge Pressure (bar) | 183 | 232 | 264 | 304 | 352 | 413 | 492 | 517 |
| Volume/Stroke (gal/rev) | 11.567 | 9.139 | 8.032 | 6.997 | 6.033 | 5.141 | 4.320 | 3.570 |
| Volume/Stroke (L/rev) | 43.785 | 34.596 | 30.406 | 26.487 | 22.838 | 19.460 | 16.352 | 13.514 |
| Pump Speed (SPM) | Rated Input (HP) | Hydr. Power (HP) | GPM (9") | GPM (8") | GPM (7.5") | GPM (7") | GPM (6.5") | GPM (6") | GPM (5.5") | GPM (5") |
|---|---|---|---|---|---|---|---|---|---|---|
| 110 | 2200 | 1970 | 1272 | 1005 | 883 | 769 | 663 | 565 | 474 | 392 |
| 105 | 2089 | 1880 | 1214 | 959 | 843 | 734 | 633 | 539 | 453 | 374 |
| 100 | 1990 | 1791 | 1156 | 913 | 803 | 699 | 603 | 513 | 431 | 356 |
| 90 | 1791 | 1612 | 1040 | 822 | 722 | 629 | 542 | 462 | 388 | 321 |
| 80 | 1592 | 1432 | 925 | 730 | 642 | 559 | 482 | 411 | 345 | 285 |
| 70 | 1392 | 1253 | 809 | 639 | 562 | 489 | 422 | 359 | 302 | 249 |
| 60 | 1194 | 1074 | 693 | 548 | 481 | 419 | 361 | 308 | 259 | 213 |
| 50 | 995 | 895 | 578 | 456 | 401 | 349 | 301 | 256 | 215 | 178 |
| 40 | 796 | 716 | 462 | 365 | 321 | 279 | 241 | 205 | 172 | 142 |
Easy Wearing Parts for Drillmec 14T2200 with OEM Part Numbers:
Cylinder Liners and Pistons:
Description: Hy-Chrome Cylinder 5" — OEM Part No. 01919522
Description: Hy-Chrome Cylinder 5-1/2" — OEM Part No. 01919523
Description: Hy-Chrome Cylinder — OEM Part No. 01919524, 01919511, 01919525, 01919528
Description: Piston Assembly 4-1/2" — OEM Part No. 01912152
Description: Piston Assembly 5" — OEM Part No. 01912153
Description: Piston Complete 5-1/2" — OEM Part No. 01912154
Description: Piston Complete 6-1/2" — OEM Part No. 01912149
Description: Liner Seal 4"–7-1/2" — OEM Part No. 2930-XX (Rubber), 2930-XXU (Urethane)
Valve Assembly and Components:
Description: Complete Valve — OEM Part No. 40390797
Description: Valve Seat — OEM Part No. 40390798
Description: Valve Kit — OEM Part No. 40390796 (API 7", full open)
Description: Valve Spring — OEM Part No. RI40390796-03
Description: Valve Insert — OEM Part No. RI40390797-01
Description: Valve Guide Bushing — OEM Part No. 01913305
Fluid End Modules and Accessories:
Description: Discharge Module — OEM Part No. 01913275
Description: Suction Module — OEM Part No. 01913274
Description: Pulsation Dampener — OEM Part No. 01913163-1, 40391524-1
Description: Plug — OEM Part No. 01913304
Description: Flange — OEM Part No. 01913396
Rods and Related:
Description: Piston Rod — OEM Part No. 01913298
Description: Crosshead — OEM Part No. 01913260
Description: Crosshead Slipper Guide — OEM Part No. 01913261
Description: Extension Rod — OEM Part No. 01913263
Description: 2-Half Tie Collar — OEM Part No. 01913266
Description: Counter Rod — OEM Part No. 01913267
Materials and Construction:
Each Drillmec 14T2200 part is made from materials selected for demanding high-pressure drilling service. Fluid end modules use high-strength alloy forged steel (AISI 8630A or AISI 4135 for 7500 PSI), with high-pressure forging and world-class heat treatment including normalizing, roughing, quenching, and tempering. Valve bodies and seats use high-quality alloy steel (20CrMnTi or AISI 8620/20CrNiMo) with forging and advanced heat treatment. Liners use forged steel outer sleeves and high-chromium cast iron inner sleeves, or zirconia ceramic for extended life. Pistons use high-strength steel cores with nitrile rubber or polyurethane cups. Piston cores are made of 42CrMo. All parts are precision machined to ensure proper fit and reliable performance.
Key Performance Advantages:
Our Drillmec 14T2200 mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The 14T2200 delivers 2,200 HP with a maximum working pressure of up to 7,500 PSI and a flow rate of up to 1,272 GPM at 110 SPM. The pump features a compact and robust design suitable for a wide range of ultra-deep well and high-pressure drilling operations. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.
Applications:
These parts are suitable for ultra-deep well drilling, high-pressure drilling, land and offshore rigs, well service, and workover operations.
Compatibility:
All listed parts are direct replacements for Drillmec 14T2200 triplex mud pump components. The 14T2200 is not interchangeable with the 12T1600 or 9T1000 fluid end modules. No modification is required for installation.
Order Information:
MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.