The Drillmec 9T1000 is a 1,000 HP (746 kW) triplex single-acting piston pump with a 9-inch (228.6 mm) stroke and a gear ratio of 3.222. It is designed for deep well and ultra-deep well drilling operations, with a maximum rated input of 800 HP (596 kW) at 150 SPM as per the header specification, and a rated input of 1,000 HP at 150 SPM as per the performance data sheet. The pump accommodates liner sizes from 4.5 inch to 7 inch (114.3 mm to 177.8 mm) and delivers a maximum discharge pressure of 5,000 PSI (345 bar) with a maximum flow rate of 674 GPM (2,554 L/min). The 9T1000 is widely used in land and offshore rigs, high-pressure operations, and well service applications. Our Drillmec 9T1000 mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.
Performance Data (9T1000 Triplex Mud Pump):
| Liner Size (inch) | 7 | 6.5 | 6 | 5.5 | 5 | 4.5 |
|---|---|---|---|---|---|---|
| Liner Size (mm) | 177.8 | 165.1 | 152.4 | 139.7 | 127 | 114.3 |
| Max Discharge Pressure (psi) | 2277 | 2639 | 3103 | 3698 | 4481 | 5000 |
| Max Discharge Pressure (bar) | 157 | 182 | 214 | 255 | 309 | 345 |
| Volume/Stroke (gal/rev) | 4.498 | 3.879 | 3.305 | 2.777 | 2.295 | 1.859 |
| Volume/Stroke (L/rev) | 17.027 | 14.682 | 12.510 | 10.512 | 8.687 | 7.037 |
| Pump Speed (SPM) | Rated Input (HP) | Hydr. Power (HP) | GPM (7") | GPM (6.5") | GPM (6") | GPM (5.5") | GPM (5") | GPM (4.5") |
|---|---|---|---|---|---|---|---|---|
| 150 | 1000 | 896 | 674 | 581 | 495 | 416 | 344 | 278 |
| 130 | 863 | 777 | 584 | 504 | 429 | 360 | 298 | 241 |
| 110 | 730 | 657 | 494 | 426 | 363 | 305 | 252 | 204 |
| 90 | 597 | 538 | 404 | 348 | 297 | 249 | 206 | 167 |
| 70 | 464 | 418 | 314 | 271 | 231 | 194 | 160 | 129 |
| 50 | 332 | 299 | 224 | 193 | 165 | 138 | 114 | 92 |
Easy Wearing Parts for Drillmec 9T1000 with OEM Part Numbers:
Cylinder Liners:
Description: 4-1/2" Liner — OEM Part No. 01913505
Description: 5" Liner — OEM Part No. 01913503
Description: 5-1/2" Liner — OEM Part No. 01913288
Description: 6" Liner — OEM Part No. 01913293
Description: 6-1/2" Liner — OEM Part No. 01913290
Description: 7" Liner — OEM Part No. 01913294
Pistons and Rubber:
Description: 4-1/2" Piston — OEM Part No. 01910970
Description: 5" Piston — OEM Part No. 01910862
Description: 5-1/2" Piston — OEM Part No. 01910938
Description: 6" Piston — OEM Part No. 01910863
Description: 6-1/2" Piston — OEM Part No. 01911061
Description: 7" Piston — OEM Part No. 01920592
Valve Assembly and Components:
Description: Complete Valve — OEM Part No. 40390797
Description: Valve Seat — OEM Part No. 40390798
Description: Valve Kit — OEM Part No. 40390796 (API 7", full open)
Description: Valve Spring — OEM Part No. RI40390796-03
Description: Valve Insert — OEM Part No. RI40390797-01
Description: Valve Guide Bushing — OEM Part No. 01913305
Fluid End Modules and Accessories:
Description: Discharge Module — OEM Part No. 01913275
Description: Suction Module — OEM Part No. 01913274
Description: Plug — OEM Part No. 01913304
Description: Flange — OEM Part No. 01913396
Description: Pulsation Dampener — OEM Part No. 01913163-1 and 40391524-1
Description: Pulsation Dampener Charging Kit — OEM Part No. 01913114-1
Rods and Related:
Description: Piston Rod — OEM Part No. 01913298
Description: Crosshead — OEM Part No. 01913260
Description: Crosshead Slipper Guide — OEM Part No. 01913261
Description: Extension Rod — OEM Part No. 01913263
Description: 2-Half Tie Collar — OEM Part No. 01913266
Description: Counter Rod — OEM Part No. 01913267
Materials and Construction:
Each Drillmec 9T1000 part is made from materials selected for demanding high-pressure drilling service. Fluid end modules use high-strength alloy forged steel. Liners use forged steel outer sleeves and high-chromium cast iron inner sleeves, or zirconia ceramic for extended life in highly abrasive conditions. The inner sleeve has a hardness of more than HRC62 after heat treatment and can withstand mud pressure of 7000 PSI. Pistons use high-strength steel cores with nitrile rubber or polyurethane cups. Valve bodies and seats use forged alloy steel with advanced heat treatment. Seals use NBR or HNBR rubber suitable for water-based, oil-based, and synthetic drilling fluids. All parts are precision machined to ensure proper fit and reliable performance.
Key Performance Advantages:
Our Drillmec 9T1000 mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The 9T1000 delivers up to 1,000 HP with a maximum working pressure of 5,000 PSI and a flow rate of up to 674 GPM at 150 SPM. The pump features a robust design suitable for a wide range of high-pressure drilling operations. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.
Applications:
These parts are suitable for deep well drilling, ultra-deep well drilling, high-pressure drilling, land and offshore rigs, well service, and workover operations.
Compatibility:
All listed parts are direct replacements for Drillmec 9T1000 triplex mud pump components. The 9T1000 shares numerous fluid end components with the 12T1600 and 9T800 models where noted. No modification is required for installation.
Order Information:
MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.