The Drillmec 7TS600 is a 600 HP (448 kW) triplex single-acting piston pump with a 7-inch (177.8 mm) stroke and a rated input of 600 HP at 150 SPM. It is designed for medium-depth wells (2,500–4,500 meters), conventional high-pressure drilling, and land rigs. The pump accommodates liner sizes from 4 inch to 7 inch (101.6 mm to 177.8 mm), with a maximum discharge pressure of 5,000 PSI (34.5 MPa) and a maximum flow rate of 524 GPM (1,986 L/min) at 150 SPM. The suction connection is a 6-inch ASA 150# R.J. flange, and the discharge connection is a 5-inch API 5,000# R.J. flange. The 7TS600 features a compact, robust design with a forged steel fluid end and modular construction for simplified maintenance. Our Drillmec 7TS600 mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.
Easy Wearing Parts for Drillmec 7TS600 with OEM Part Numbers:
Fluid End Modules:
| Description | OEM Part No. | Qty per Pump |
|---|---|---|
| Fluid Cylinder (Integral Valve Chambers) | 810-0120-001 | 3 |
| Valve Cover | 810-0330-001 | 6 |
| Suction Valve Assembly (API #6) | 810-0390-801 | 6 |
| Discharge Seat (API #6) | 810-0390-802 | 6 |
Cylinder Liners:
| Description | Part No. |
|---|---|
| Liner (Standard 5.5 inch / 140 mm) | 810-0210-001 |
| Liner 4 inch Kit (Liner and Piston) | 01916322-1 |
| Liner 4.5 inch Kit (Liner and Piston) | 01915196-1 |
| Liner 5 inch Kit (Liner and Piston) | 01912382-1 |
| Liner 5.5 inch Kit (Liner and Piston) | 01912383-1 |
| Liner 6 inch Kit (Liner and Piston) | 01912299-1 |
| Liner 6.5 inch Kit (Liner and Piston) | 01912399-1 |
| Liner 7 inch Kit (Liner and Piston) | 01912298-1 |
Pistons and Rubber:
| Description | Part No. |
|---|---|
| Piston Complete 6-1/2 inch (for 12T-1600, 9T-1000, 9T-800, 7TS-600) | 01912149 |
| Piston Complete 5-1/2 inch (for 12T-1600, 9T-1000, 9T-800, 7TS-600) | 01912154 |
Valve Assembly and Components:
| Description | Part No. |
|---|---|
| Valve Kit API #6 inch | 40390738-1 |
| Valve Seat Hydraulic Puller | 01912135-1 |
| Valve Assembly (API #6 Full Open Type) | Available |
| Valve Seat (API #6 Full Open) | Available |
Materials and Construction:
Each Drillmec 7TS600 part is made from materials selected for demanding high-pressure drilling service. The fluid end uses a single integral forged steel cylinder that contains both suction and discharge valve chambers in one housing, reducing potential leak paths and simplifying installation. The part is forged from high-strength alloy steel, quenched and tempered for a rated working pressure of 5,000 PSI (34.3 MPa), with a hydrostatic test pressure of 7,500 PSI (51.7 MPa). The design features straight, short flow passages to minimize erosion and pressure loss, and thick-wall forged construction to withstand 5,000 psi cyclic service with a high safety margin. Liners use forged steel outer sleeves and high-chromium cast iron inner sleeves, or ceramic for extended life. Pistons use high-strength steel cores with nitrile rubber or polyurethane cups. Valve bodies and seats use forged alloy steel with advanced heat treatment. All parts are precision machined to ensure proper fit and reliable performance.
Key Performance Advantages:
Our Drillmec 7TS600 mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The 7TS600 delivers 600 HP with a maximum working pressure of 5,000 PSI and a flow rate of up to 524 GPM at 150 SPM. The integral valve chamber design reduces leak paths and simplifies maintenance, while the straight flow passages minimize erosion and pressure loss at higher circulation rates. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.
Applications:
These parts are suitable for medium-depth well drilling (2,500–4,500 meters), conventional high-pressure drilling, land rigs, well service, and workover operations.
Compatibility:
All listed parts are direct replacements for Drillmec 7TS600 triplex mud pump components. The 7TS600 shares numerous fluid end components with the 7TS500 and 9T800 models where noted. No modification is required for installation.
Order Information:
MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.