DZZX Ceramic Cylinder Liner – API 7K ZTA Spare Parts for F/FB/P/PXL/W Series Mud Pumps

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 7K DZZX ceramic cylinder liner – covers F800/1000, FB1300/1600, 12P-160, 14P-220, PXL 7500PSI, W3000. ZTA ceramic + forged 45# steel. Hardness 92-94 HRC, working pressure 5000-10000 PSI, service life 6000-15000+ hours (5-10x bimetal). Mirror honed, 100% OEM interchangeable. Bore sizes 120-250mm, strokes 254-381mm. Stock ready for W3000, PXL 7500PSI, FB1300/1600.

Conatct For Details
DetailReview(0)Additional

OEM Interchangeable, 5-10x Longer Life Than Bimetal Liners – Full DZZX High-Pressure Series Coverage

Product Overview
As the core fluid-end component of DZZX triplex mud pumps – a trusted brand for global oilfield high-pressure pumping equipment – our ceramic cylinder liners are exclusively engineered for DZZX six key models across F, FB, P, PXL, and W series. The liners adopt a high-performance composite structure: a forged 45# carbon steel (AISI 1045) outer shell combined with a ZTA (Zirconia Toughened Alumina) ceramic inner sleeve. Each liner delivers unmatched wear resistance, corrosion protection, and ultra-high pressure tolerance. Fully compliant with API 7K standards and precision-machined to DZZX original dimensions, all liners are 100% interchangeable with OEM parts. They are ideal for onshore and offshore drilling, medium-deep to ultra-deep well operations (1500-6000m), high-pressure industrial pumping, and extreme abrasive/corrosive mud environments.

We cover 6 key DZZX models:

  • F Series: F800/1000 (800/1000HP, 5000 PSI)

  • FB Series: FB1300/1600 (1300/1600HP, 7500 PSI)

  • P Series: 12P-160 (493HP, 5000 PSI), 14P-220 (691HP, 5000 PSI)

  • PXL Series: PXL 7500PSI (1100HP, 7500 PSI)

  • W Series: W3000 (3000HP, 10000 PSI)

Core Specifications

ParameterDetail
MaterialOuter: Forged 45# Carbon Steel (AISI 1045); Inner: ZTA Ceramic (Zirconia Toughened Alumina)
Ceramic Hardness92 – 94 HRC
Steel Shell HardnessHB 180 – 220
Working Pressure34.5 – 69.0 MPa (5000 – 10000 PSI) – model-specific matching
Service Life6000 – 15000+ operating hours (5-10x longer than bimetal/high-chrome liners)
Surface FinishMirror honing (4-8 RMS / Ra ≤ 0.4μm)
CertificationsAPI 7K, ISO 9001
Bore Sizes120 – 250 mm (compliant with GB/T 2348-1993)
Stroke Lengths254 – 381 mm (compliant with API 7K stroke design requirements)
AssemblyHot-press interference fit + shoulder-locking design (anti-slippage + high-pressure sealing)
MOQ3 pieces (mixed models accepted)
Lead Time5 – 15 working days (large inventory for PXL 7500PSI, W3000, FB1300/1600)
PaymentT/T, L/C, Western Union, Alibaba Trade Assurance

Model-Specific Matching Table

SeriesModelPowerMax PressureBore SizesStrokeApplication
FF800/1000800/1000HP5000 PSI120, 140, 160mm279mmMedium-deep well (1500-2500m), onshore drilling
FBFB1300/16001300/1600HP7500 PSI150, 170, 190mm305mmDeep well (2500-4000m), offshore auxiliary
P12P-160493HP5000 PSI120, 130mm254mmMedium-scale onshore, water well
P14P-220691HP5000 PSI140, 150mm279mmWorkover rigs, high-sand formations
PXLPXL 7500PSI1100HP7500 PSI160, 180, 200mm305mmUltra-deep well (3500-5000m), offshore
WW30003000HP10000 PSI200, 220, 250mm381mmUltra-deep well (5000-6000m), deepwater

Key Advantages

  1. High-Pressure Precision for DZZX’s Core Series – ZTA ceramic liners are engineered to match each DZZX model’s extreme pressure requirements: from P series’ medium-pressure operations (5000 PSI) to W3000’s 10000 PSI ultra-high-pressure design and PXL 7500PSI’s dedicated 7500 PSI rating. The ceramic offers superior toughness compared to pure alumina – resisting abrasive solids (up to 21% in drilling fluids) and corrosive media (chloride, sulfide, H₂S), eliminating scratches and pitting even in long-term cyclic pressure loads.

  2. OEM Interchangeability & API 7K Compliance – Precision machined to ±0.025mm dimensional tolerance, all liners are 100% interchangeable with DZZX original parts across all 6 models. Each liner passes a 1.5x rated pressure hydrostatic test (3 minutes, no leakage) and meets API 7K standards for oilfield high-pressure equipment. Fully compatible with DZZX’s fluid end structures, maintaining the brand’s legendary reliability in harsh drilling environments. ISO 9001 certified manufacturing ensures consistent quality.

  3. Extended Longevity for Cost-Efficient Operations – For ultra-high-pressure models (W3000, PXL 7500PSI), service life reaches up to 15000+ hours (W3000) and 12000+ hours (PXL 7500PSI) – 10x longer than bimetal liners, critical for reducing downtime in high-cost offshore and ultra-deep well projects. For medium-high pressure models (FB1300/1600, F800/1000), 8000-10000+ operating hours cut maintenance costs by 40-50% compared to traditional liners. For P series models, 6000+ hours provide stable performance and low replacement frequency for medium-scale operations.

  4. High-Strength Structure for Extreme Conditions – The forged 45# steel shell (tensile strength ≥610 MPa) resists fatigue under peak pressures up to 10000 PSI (W3000). The permanent metallurgical bond between steel and ceramic prevents any relative movement or leakage – even in high-temperature (up to 120°C) drilling fluid environments, perfectly adapting to DZZX’s rugged working scenarios (e.g., deepwater operations, high-sand-content formations).

  5. Targeted Supply for DZZX Users – We stock DZZX hot models (W3000, PXL 7500PSI, FB1300/1600) in full bore sizes for fast delivery. Custom dimensions are supported based on specific model requirements. Mixed-model trial orders (MOQ only 3 pieces) are accepted – ideal for buyers maintaining multiple DZZX pump models, allowing on-site compatibility verification.

Application Scenarios

  • Medium-deep well drilling (1500-2500m) – F800/1000, 12P-160, 14P-220

  • Deep well drilling (2500-4000m) – FB1300/1600

  • Ultra-deep well drilling (3500-6000m) – PXL 7500PSI, W3000

  • Offshore deepwater operations – W3000, PXL 7500PSI, FB1300/1600

  • Onshore large-scale oil & gas drilling – all series

  • High-pressure corrosive formation drilling – W3000, PXL 7500PSI

  • Industrial high-pressure slurry pumping – F800/1000, 14P-220

  • DZZX mud pump maintenance and overhaul – all models

Installation & Maintenance Tips

  • Handle with soft padding – avoid dropping or impacting the ceramic sleeve (critical for maintaining high-pressure sealing precision, especially for W3000’s 10000 PSI and PXL 7500PSI’s 7500 PSI designs).

  • Ensure piston-liner alignment (clearance 0.05-0.1mm) to prevent eccentric wear – key for long-stroke models (e.g., W3000’s 381mm stroke), which directly affects flow control accuracy and pressure stability.

  • Drain mud completely when idle below 0°C to prevent freezing and ceramic cracking – applicable for cold-region onshore drilling operations.

  • Use wooden blocks for adjustments – never strike the liner with metal tools, as this protects the ceramic inner sleeve and DZZX’s precision fluid end structure.

  • Confirm model-specific bore size and pressure rating matching before installation (refer to the matching table) – no additional modification needed for direct replacement.

Packaging & Shipping

  • Inner Package: Anti-rust oil + vacuum-sealed plastic bag + shock-absorbing foam (double-layer for W3000 and PXL 7500PSI)

  • Outer Package: Reinforced wooden case (customized for sea or air freight, anti-collision + anti-compression design)

  • Shipping Terms: FOB, CIF, EXW (DHL, FedEx, UPS for express; sea shipping for bulk orders)

  • Port of Loading: Shanghai, Qingdao, Tianjin, China

  • Special Note: For high-value orders (e.g., W3000, PXL 7500PSI bulk purchases), mandatory transportation insurance and shock-proof packaging upgrades are provided.

FAQ

Q: Are your liners compatible with DZZX W3000’s 10000 PSI ultra-high-pressure design?
A: 100% compatible. Engineered to withstand 69.0 MPa (10000 PSI) peak pressure, precision machined to DZZX’s original dimensions (381mm stroke). Direct replacement, no modification needed for extreme high-pressure operations.

Q: Can I order mixed models of DZZX liners (e.g., PXL 7500PSI + FB1300/1600) in one trial order?
A: Yes. Mixed-model trial orders (MOQ 3 pieces total) are accepted, allowing you to test compatibility for multiple DZZX pump models.

Q: Do you have DZZX hot models in stock?
A: Yes. W3000, PXL 7500PSI, and FB1300/1600 are kept in large inventory with full bore sizes – lead time 5-7 days, supporting urgent maintenance needs for offshore and ultra-deep well projects.

Q: What certifications do you provide for high-pressure models like PXL 7500PSI and W3000?
A: API 7K (mandatory for oilfield high-pressure equipment) and ISO 9001. Full test reports (including 7500/10000 PSI pressure resistance, wear resistance, and hydrostatic test data) and certification copies are available upon request, compliant with global oilfield standards.

Q: Do you support custom bore sizes for DZZX pumps?
A: Yes. Custom bore sizes and lengths are supported based on your drawings or samples.

Contact Us Now for a Quote or Compatibility Verification
Email: info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit