OEM Interchangeable, 5-10x Longer Life Than Bimetal Liners – For FMC High-Pressure Oilfield Drilling
Product Overview
As the core fluid-end component of FMC mud pumps – a world-leading brand in global oilfield equipment – our ceramic cylinder liners are exclusively engineered for FMC key models: 420/0618/0918 series triplex mud pumps and the dedicated accessory model L0618/0918 P1272060. The liners adopt a high-performance composite structure: a forged 45# carbon steel (AISI 1045) outer shell combined with a ZTA (Zirconia Toughened Alumina) ceramic inner sleeve. Each liner delivers unmatched wear resistance, corrosion protection, and ultra-high pressure tolerance. Fully compliant with API 7K standards and precision-machined to FMC original dimensions, all liners are 100% interchangeable with OEM parts. They are ideal for onshore and offshore drilling, medium-deep to ultra-deep well operations (1500-6000m), high-pressure industrial pumping, and extreme abrasive/corrosive mud environments (including high-sand-content and H₂S-bearing formations).
We cover FMC core models:
420 Series: 420HP, 5000 PSI
0618 Series: 1000HP, 7500 PSI
0918 Series: 1500HP, 10000 PSI
L0618/0918 P1272060: Dedicated accessory matching 0618/0918 series
Core Specifications
| Parameter | Detail |
|---|---|
| Material | Outer: Forged 45# Carbon Steel (AISI 1045); Inner: ZTA Ceramic (Zirconia Toughened Alumina) |
| Ceramic Hardness | 92 – 94 HRC |
| Steel Shell Hardness | HB 180 – 220 |
| Working Pressure | 34.5 – 69.0 MPa (5000 – 10000 PSI) – model-specific matching |
| Service Life | 6000 – 15000+ operating hours (5-10x longer than bimetal/high-chrome liners) |
| Surface Finish | Mirror honing (4-8 RMS / Ra ≤ 0.4μm) |
| Certifications | API 7K, ISO 9001 |
| Bore Sizes | 120 – 220 mm (compliant with API 7K cylinder bore specifications) |
| Stroke Lengths | 254 – 381 mm (optimized for FMC’s crankshaft design) |
| Assembly | Hot-press interference fit + shoulder-locking design (anti-slippage + high-pressure sealing) |
| MOQ | 3 pieces (mixed models accepted) |
| Lead Time | 5 – 15 working days (large inventory for 0618/0918 series and L0618/0918 P1272060) |
| Payment | T/T, L/C, Western Union, Alibaba Trade Assurance |
Model-Specific Matching Table
| Series | Model | Power | Max Pressure | Bore Sizes | Stroke | Application |
|---|---|---|---|---|---|---|
| 420 | 420 | 420HP | 5000 PSI | 120, 130, 140mm | 254mm | Medium-scale onshore (1500-2000m), water well, workover |
| 0618 | 0618 | 1000HP | 7500 PSI | 150, 160, 170mm | 305mm | Deep well (2500-4000m), high-displacement circulation |
| 0918 | 0918 | 1500HP | 10000 PSI | 180, 200, 220mm | 381mm | Ultra-deep well (4000-6000m), deepwater, H₂S formations |
| Accessory | L0618/0918 P1272060 | Matches 0618/0918 | 7500/10000 PSI | 160/200mm | 305/381mm | 0618/0918 pump maintenance, high-precision replacement |
Key Advantages
High-Pressure Precision for FMC’s Core Design – ZTA ceramic liners are engineered to match FMC’s strict pressure standards: from 420 series’ medium-pressure operations (5000 PSI) to 0918 series’ 10000 PSI ultra-high-pressure design, and L0618/0918 P1272060’s dedicated pressure adaptation. The ceramic offers superior toughness compared to pure alumina – resisting abrasive solids (up to 21% in drilling fluids) and corrosive media (chloride, sulfide, H₂S), eliminating scratches and pitting even in long-term cyclic pressure loads, which is critical for FMC pumps’ legendary reliability in harsh oilfield environments.
OEM Interchangeability & FMC Standard Compliance – Precision machined to ±0.025mm dimensional tolerance, all liners are 100% interchangeable with FMC original parts for 420/0618/0918 series and L0618/0918 P1272060. Each liner passes a 1.5x rated pressure hydrostatic test (3 minutes, no leakage) and meets API 7K standards. Fully compatible with FMC’s fluid end structures, including crankshaft-stroke matching and high-pressure sealing requirements. ISO 9001 certified manufacturing ensures consistent quality.
Extended Longevity for Cost-Efficient Operations – For ultra-high-pressure models (0918 series, L0618/0918 P1272060 10000 PSI), service life reaches up to 15000+ hours – 10x longer than bimetal liners, critical for reducing downtime in high-cost offshore and ultra-deep well projects. For medium-high pressure models (0618 series, L0618/0918 P1272060 7500 PSI), 8000-12000+ operating hours cut maintenance costs by 45-50% compared to traditional liners. For the 420 series, 6000+ hours provide stable performance and low replacement frequency for medium-scale operations.
High-Strength Structure for Extreme Conditions – The forged 45# steel shell (tensile strength ≥610 MPa) resists fatigue under peak pressures up to 10000 PSI (0918 series). The permanent metallurgical bond between steel and ceramic prevents any relative movement or leakage – even in high-temperature (up to 120°C) drilling fluid environments, perfectly adapting to FMC’s rugged working scenarios (e.g., deepwater operations, high-sand-content formations). The structure is optimized for FMC’s cylinder-piston coordination, ensuring smooth operation without affecting pump efficiency.
Targeted Supply for FMC Users – We stock FMC hot models (0618/0918 series, L0618/0918 P1272060) in full bore sizes for fast delivery. Custom dimensions are supported based on FMC’s original equipment requirements. Mixed-model trial orders (MOQ only 3 pieces) are accepted – ideal for buyers maintaining multiple FMC pump models, allowing on-site compatibility verification.
Application Scenarios
Medium-scale onshore drilling (1500-2000m) – 420 series
Deep well drilling (2500-4000m) – 0618 series, L0618/0918 P1272060 (7500 PSI)
Ultra-deep well drilling (4000-6000m) – 0918 series, L0618/0918 P1272060 (10000 PSI)
Offshore deepwater operations – 0918 series, L0618/0918 P1272060
High-pressure corrosive formation drilling (H₂S, high-sand) – 0618/0918 series, L0618/0918 P1272060
High-sand-content mud circulation – all series
FMC mud pump maintenance and overhaul – all models
Installation & Maintenance Tips
Handle with soft padding – avoid dropping or impacting the ceramic sleeve (critical for maintaining high-pressure sealing precision, especially for 0918 series’ 10000 PSI design and L0618/0918 P1272060’s dedicated fit).
Ensure piston-liner alignment (clearance 0.05-0.1mm) to prevent eccentric wear – key for FMC’s long-stroke models (e.g., 0918 series’ 381mm stroke), which directly affects flow control accuracy and pressure stability.
Drain mud completely when idle below 0°C to prevent freezing and ceramic cracking – applicable for cold-region onshore drilling operations.
Use wooden blocks for adjustments – never strike the liner with metal tools, as this protects the ceramic inner sleeve and FMC’s precision fluid end structure.
Confirm model-specific bore size and pressure rating matching before installation – L0618/0918 P1272060 must be paired with corresponding 0618/0918 series pumps for optimal performance.
Packaging & Shipping
Inner Package: Anti-rust oil + vacuum-sealed plastic bag + shock-absorbing foam (double-layer for 0918 series & L0618/0918 P1272060)
Outer Package: Reinforced wooden case (customized for sea or air freight, anti-collision + anti-compression design, FMC standard compatible)
Shipping Terms: FOB, CIF, EXW (DHL, FedEx, UPS for express; sea shipping for bulk orders)
Port of Loading: Shanghai, Qingdao, Tianjin, China
Special Note: For high-value orders (e.g., 0918 series, L0618/0918 P1272060 bulk purchases), mandatory transportation insurance and shock-proof packaging upgrades are provided.
FAQ
Q: Are your liners compatible with FMC 0918 series’ 10000 PSI ultra-high-pressure design?
A: 100% compatible. Engineered to withstand 69.0 MPa (10000 PSI) peak pressure, precision machined to FMC’s original dimensions (381mm stroke). Direct replacement, no modification needed for extreme high-pressure operations.
Q: Can I order L0618/0918 P1272060 with 0618/0918 series liners in one trial order?
A: Yes. Mixed-model trial orders (MOQ 3 pieces total) are accepted, allowing you to test compatibility for multiple FMC pump models and accessories.
Q: Do you have FMC hot models (0618/0918 series, L0618/0918 P1272060) in stock?
A: Yes. These models are kept in large inventory with full bore sizes – lead time 5-7 days, supporting urgent maintenance needs for offshore and ultra-deep well projects.
Q: What certifications do you provide for FMC-compatible liners?
A: API 7K and ISO 9001. Full test reports (including 7500/10000 PSI pressure resistance, wear resistance, and hydrostatic test data) and certification copies are available upon request, fully compliant with FMC’s global equipment standards.
Q: Do you support custom bore sizes for FMC pumps?
A: Yes. Custom bore sizes and lengths are supported based on your drawings or samples.
Contact Us Now for a Quote or Compatibility Verification
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.