EAP‑I‑100‑400 – Complete Specifications & Dimensions
The EAP‑I‑100‑400 is a horizontal, single‑stage, single‑suction, centerline‑mounted (OH2) overhung centrifugal pump manufactured according to API 610 and GB/T 5656 standards. It is a high‑flow, medium pressure model of the EAP‑I series, designed for medium pressure (≤2.5 MPa) and medium temperature (-40℃ to +200℃) applications requiring large volumetric flow.
Model: EAP‑I‑100‑400
Inlet DN: 100 mm
Flow Range: 108 – 1440 m³/h
Head Range: 25 – 300 m
Speed: 2900 / 1450 r/min
Design Pressure: ≤ 2.5 MPa
Temperature Range: -40℃ to +200℃
Structure: OH2 (centerline‑mounted)
Seal Standard: API 682 (single mechanical seal)
Design Standard: API 610 (10th/11th/12th editions), GB/T 5656
Material Options: Carbon steel, 304/316 stainless steel
OH2 centerline‑mounted – uniform thermal expansion, minimal distortion at medium temperature
Back pull‑out overhung design – maintenance without removing suction/discharge piping or motor
Impeller with back vanes – reduces axial thrust, extends bearing life
Single volute casing – balances radial force, low vibration
Standard heavy‑duty bearings – reliable operation, easy replacement, low cost
API 682 seal compatibility – supports single mechanical seals for medium pressure services
Optimized hydraulics for high flow – wide high‑efficiency zone, excellent cavitation performance
EAP‑I‑100‑400 is a direct drop‑in replacement for:
Sulzer PRE 100‑400 (standard pressure variant)
Flowserve 3700 series (equivalent size)
KSB RPH / Etanorm API 100‑400
Goulds 3700 / 3900 100‑400
Ensival‑Moret OH2 standard pump
Same mounting dimensions, same hydraulic performance – no pipeline or foundation modification required.
Petrochemical – large‑scale conventional process transfer, high‑flow solvent circulation, crude oil transfer
Coal Chemical – high‑flow medium‑pressure water circulation, process water supply
Energy & Power – medium‑pressure boiler feed water, main cooling water circulation, heat exchange systems
General Industry – industrial water supply, large HVAC circulation, clean liquid transfer
Water Treatment – high‑flow filtration feed, reverse osmosis pre‑treatment, water distribution
Clean liquids, water, oil products, solvents
Neutral and weakly corrosive media
Trace particle‑containing media (≤0.5% solids by weight)
Suction flange: DN100 (4 inch) – Class 150 / 300 compatible
Discharge flange: DN100 (4 inch)
Baseplate mounting: Standard API 610 OH2 footprint
Shaft height: Matches Sulzer PRE and Flowserve 3700 equivalents
Coupling guard included
Q: What is the maximum flow of EAP‑I‑100‑400?
A: 1440 m³/h. For higher flows, see EAP‑I‑150‑400 or EAP‑I‑150‑500.
Q: What is the maximum head?
A: 300 meters at 2900 r/min. For heads above 300 m, see EAP‑I‑100‑500 (if available) or consult engineering.
Q: Can it handle temperatures above 200℃?
A: Standard design is -40℃ to +200℃. For higher temperatures, please refer to EAP9 series (up to 300℃) or EAPG series (up to 450℃).
Q: What is the maximum design pressure?
A: 2.5 MPa. For higher pressures (4.0/5.0/10.0 MPa), see EAP9 or EAPG series.
Q: Does EAP‑I‑100‑400 directly replace Sulzer PRE 100‑400?
A: Yes. Identical installation dimensions and hydraulic performance.
Q: What mechanical seal is standard?
A: API 682 single mechanical seal. Double seals and seal plans (11, 21, 23, 52, 53A, 54) available on request.
Q: What materials are available?
A: Carbon steel (standard), 304 stainless steel, 316 stainless steel. For higher corrosion resistance, consult our engineering team.
Q: What is the bearing life?
A: Over 17,500 hours under normal operating conditions.
Q: What is the lead time?
A: Standard lead time 3‑4 weeks. Express options available.
EAP‑I‑100‑500 (higher head, if available)
EAP‑I‑150‑400 (higher flow, similar head)
EAP‑I‑80‑400 (lower flow, same head)
EAP9‑100‑400 (higher temperature & pressure version)
View all EAP‑I series models
API 610 compliance – reliable for continuous operation
OH2 centerline‑mounted – medium temperature stability
Back pull‑out design – reduced maintenance downtime
High flow capability – up to 1440 m³/h
Standard bearings – low cost, easy availability
Direct replacement for major international brands – no piping modifications
Cost‑effective general‑purpose solution for large flows
For price, datasheet, cross‑reference confirmation, or technical support:
Email: info@hyrig.com
Our engineering team responds within 24 hours with a quote and recommendations.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.