EAP‑I‑50‑250 – Complete Specifications & Dimensions
The EAP‑I‑50‑250 is a horizontal, single‑stage, single‑suction, centerline‑mounted (OH2) overhung centrifugal pump manufactured according to API 610 and GB/T 5656 standards. It is the general‑purpose model of the EAP family, designed for medium pressure (≤2.5 MPa) and medium temperature (-40℃ to +200℃).
Specifications
Model: EAP‑I‑50‑250
Inlet DN: 50 mm
Flow Range: 36 – 576 m³/h
Head Range: 15 – 200 m
Speed: 2900 / 1450 r/min
Design Pressure: ≤ 2.5 MPa
Temperature Range: -40℃ to +200℃
Structure: OH2 (centerline‑mounted)
Seal Standard: API 682 (single mechanical seal)
Design Standard: API 610, GB/T 5656
Materials: Carbon steel, 304/316 stainless steel
Key Features
OH2 centerline‑mounted – minimal thermal deformation
Back pull‑out design – maintenance without removing piping
Impeller with back vanes – reduces axial thrust
Single volute casing – balances radial force
Standard bearings – low cost, long life, easy replacement
API 682 seal compatibility – for medium pressure sealing
International Brand Cross‑Reference – Direct replacement for Sulzer PRE 50-250, Flowserve 3700, KSB RPH 50-250, Goulds 3700.
Typical Applications – Conventional petrochemical transfer, cooling water, solvent circulation, medium‑pressure boiler feed, general industrial processes.
Contact: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.