Elevator Series | CD & CDZH Drill Pipe Elevators
Overview:
HYRIG can supply the complete elevator series and their spare parts. This range includes CD side-door double-latch elevators and CDZH full hydraulic flipping elevators, designed for handling drill pipes, casings, and tubings during drilling and workover operations.
The elevator dimensions depend on the specific pipe size and load rating. The CDZH series allows the main body to rotate 90 degrees for automated pipe feeding from the catwalk. Please verify the required opening diameter and hinge pin dimensions against your hook and traveling block setup.
The CD series are side-door elevators, allowing them to be placed around the pipe without passing over the top. The CDZH series are full hydraulic, side-latched, and the main body can flip 90 degrees, enabling automated pipe handling when coordinated with a top drive. They feature double safety locking mechanisms (locking tongue and self-locking lever).
Selecting the correct elevator requires knowing your pipe size, load capacity, and whether you need manual or hydraulic operation.
Tell us your drill pipe or casing size, and our engineers will provide the correct model.
Used in the hoisting system of drilling rigs to handle drill strings, casing, and tubing during tripping operations. The hydraulic types are suitable for automated drilling rigs.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including elevator bodies, locking mechanisms, hinge pins, and bushings for the CD and CDZH series. Please visit our Elevator Parts page.
Specifications:
FAQ:
Contact Us:
For elevator selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.